Airtac MIJ Adjustable Cylinder MIJ25X150-75
The AirTAC MIJ Adjustable Cylinder MIJ25X150-75 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X150-75
Dial in your forward end position on-site with the AirTAC MIJ25X150-75, a double-acting round-body mini cylinder featuring a 75mm adjustable extend window. An external stop screw lets you shorten the forward stroke from its 150mm nominal length down to 75mm, absorbing setup tolerances without changing the part number. Retract remains at the full stroke length.
Built with a stainless-steel barrel and rod for mild washdown resistance, this Ø25 bore conforms to the ISO 6432 mounting interface. The 1/8" port and fixed TPU bumper pads handle speeds of 30-800 mm/s. Note this SKU lacks a magnet, so CMSG/DMSG/EMSG sensors cannot be fitted.
Airtac MIJ Adjustable Cylinder MIJ25X150-75 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X150-75 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X150-75
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X150-75 Is Used
Variable Stroke Diverters
Set the exact push distance on a sorting line to deflect different package sizes, using the 75mm adjuster to switch product flows without swapping cylinders.
Tiered Parts Feeding
Stage multiple feed lengths from a single 150mm stroke cylinder, dialing the extend end back to push components precisely to varying machine stations.
Is the Airtac MIJ Adjustable Cylinder MIJ25X150-75 the Right Cylinder?
If you need less force, stepping down to a Ø20 MIJ drops the push to 157N, while moving up to a Ø32 MIJ increases it to 402.2N. The 75mm adjustment window is ideal for changeover jobs where you need one cylinder to cover multiple staged feed distances.
Because this is a non-magnet SKU, position sensing is unavailable unless you specify the -S variant. Mounting options include LB foot, FA flange, and TC trunnion brackets, but the SDB pivot block is not offered on adjustable-stroke models. Remember that the stop screw only sets the end position; it does not lock the rod mid-stroke. To hold a load on air loss, install an external pilot check valve or rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X150-75 FAQ
This Ø25 bore cylinder has a 1/8" air port and an M10x1.25 male rod thread. The theoretical maximum force is 50 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 75mm on-site, letting you set a precise forward end position between 75mm and 150mm. The retract stroke remains full length. Note that this SKU lacks the -S magnet, so it cannot accept position sensors, and the stop screw is not a mid-stroke lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X150-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.