Airtac MIJ Adjustable Cylinder MIJ25X150-75S
The AirTAC MIJ Adjustable Cylinder MIJ25X150-75S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X150-75S
Dial in a precise forward end position on site with the AirTAC MIJ25X150-75S, a round-body stainless steel mini cylinder that lets an external stop screw shorten the extend stroke by up to 75 mm without changing parts. The built-in magnet (-S) directly supports CMSG, DMSG and EMSG position switches.
The stainless barrel and rod construction resists mild corrosion and washdown environments, while the body conforms to ISO 6432 mounting interface dimensions for standard mini brackets. Fixed TPU bumper pads decelerate the piston at the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ25X150-75S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X150-75S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X150-75S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X150-75S Is Used
Diverter Gate Positioning
Set the exact extend stop between 75 and 150 mm to deflect packages of varying widths on a conveyor without swapping actuators.
Is the Airtac MIJ Adjustable Cylinder MIJ25X150-75S the Right Cylinder?
The 75 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds across changeover jobs, letting one SKU cover several intermediate stops between 75 and 150 mm. The stop screw sets the forward end position only and is not a mid-stroke lock. Because a plain cylinder drifts on air loss, add an external rod lock or pilot check valve to hold a suspended load. You can use LB foot, FA flange or TC trunnion mounts, but the SDB pivot block is not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X150-75S FAQ
The theoretical maximum force is 50 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 75 mm on site, while retract remains full. The -S suffix means a piston magnet is built in for CMSG, DMSG or EMSG sensors. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X150-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.