Airtac MIJ Adjustable Cylinder MIJ25X160-10
The AirTAC MIJ Adjustable Cylinder MIJ25X160-10 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X160-10
Trimming the forward end by up to 10 mm via an external stop screw, this round-body stainless steel mini cylinder lets you fine-tune the extend position on-site without changing the unit. The retract stroke remains fixed at the full 160 mm.
This double-acting actuator uses the ISO 6432 mounting interface for straightforward bracket and clevis integration. It runs on a 1/8" air port at speeds from 30 to 800 mm/s, relying on fixed TPU bumper pads to decelerate the stroke end. Note that this specific SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors without switching to the -S variant.
Airtac MIJ Adjustable Cylinder MIJ25X160-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X160-10 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X160-10
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X160-10 Is Used
Tolerance Take-up Stop
Absorbs fixture machining variances by fine-tuning the forward stop on-site, ensuring precise contact without re-engineering the 160 mm stroke layout.
Changeover Sorting Gate
Quickly adjusts the extend endpoint to divert different product heights, using the 12.5 kg safe lift capacity to reposition lightweight routing gates.
Is the Airtac MIJ Adjustable Cylinder MIJ25X160-10 the Right Cylinder?
The 10 mm adjustment window is ideal for taking up mechanical tolerances or staggering part ejection during changeovers. Remember that the stop screw only sets the forward end position; it is not a mid-stroke lock, and the piston will drift on air loss. For suspended loads, install an external pilot check valve or rod lock. Mounting options include LB, FA, and TC (SDB is excluded on this adjustable type), and you must select the -S version if position sensing is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X160-10 FAQ
The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8".
An external stop screw shortens the extend stroke by up to 10 mm, allowing you to set the forward end position without swapping cylinders. The retract stroke remains the full 160 mm. The cylinder does not hold position on air loss and will drift; the stop screw is not a mid-stroke lock. This non-S SKU also lacks a magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X160-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.