Airtac MIJ Adjustable Cylinder MIJ25X160-30
The AirTAC MIJ Adjustable Cylinder MIJ25X160-30 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X160-30
Dial in a precise forward end position on the fly with the AirTAC MIJ25X160-30, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. An external stop screw lets you shorten the extend stroke by up to 30 mm on-site, giving a usable forward range of 130 to 160 mm without swapping parts. Retract remains at the full 160 mm. The stop screw sets the end position but is not a mid-stroke lock.
It features a 10 mm piston rod, a male M10x1.25 thread, and a 1/8" port. Fixed TPU bumper pads decelerate the stroke ends. Note this SKU lacks a magnet and cannot take CMSG/DMSG/EMSG sensors; order the -S variant for position sensing.
Airtac MIJ Adjustable Cylinder MIJ25X160-30 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X160-30 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X160-30
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X160-30 Is Used
Tolerance Take-Up Stop
Absorbs part-to-part length variations during machining loads, using the external screw to fine-tune the forward stop without reprogramming the machine.
Adjustable Pallet Arrestor
Halts pallets at variable end positions on a line, leveraging the 12.5 kg vertical lift capacity and fixed TPU bumpers to cushion the stop.
Is the Airtac MIJ Adjustable Cylinder MIJ25X160-30 the Right Cylinder?
The 30 mm adjustment window here is ideal for taking up mechanical tolerances or covering multiple stop points in a changeover job with one part number. Remember that a plain cylinder drifts on air loss; fit an external pilot check valve or rod lock if the load must be held. Mount via LB foot, FA flange, or TC trunnion (the SDB pivot-block is not available on this adjustable type).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X160-30 FAQ
The theoretical max force is 50 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.
An external stop screw shortens the extend stroke by up to 30 mm (usable range 130-160 mm); retract stays at the full 160 mm. This SKU has no magnet and cannot take CMSG/DMSG/EMSG sensors. For sensing, you need the -S variant. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X160-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.