Airtac MIJ Adjustable Cylinder MIJ25X160-50
The AirTAC MIJ Adjustable Cylinder MIJ25X160-50 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X160-50
Dial in a precise forward end position on-site with the AirTAC MIJ25X160-50, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. An external stop screw lets you shorten the extend stroke by up to 50 mm, yielding a usable forward travel of 110 to 160 mm without changing the part number. Retract travel remains the full 160 mm.
It uses a 1/8" port and fixed TPU bumper pads to decelerate the stroke end. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ25X160-50 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X160-50 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X160-50
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X160-50 Is Used
Tolerance Take-Up Stop
Absorb mechanical stack-up tolerances in a machining fixture by fine-tuning the forward stop position on-site, ensuring the 12.5 kg vertical lift capacity meets the exact workpiece height.
Adjustable Sealing Head
Set the precise downstroke for different pouch depths on a packaging line, relying on the fixed TPU bumper pads to soften the end impact across the 110 to 160 mm travel window.
Is the Airtac MIJ Adjustable Cylinder MIJ25X160-50 the Right Cylinder?
The 50 mm adjustment window is highly useful for absorbing mechanical tolerances or setting up staged feeds, letting one cylinder cover several intermediate stops. The external screw sets the extend endpoint but does not function as a mid-stroke lock.
Mount this cylinder using LB foot, FA flange, or TC trunnion brackets; note that the SDB pivot block is not available on this adjustable-stroke variant. Because it is a non-magnet SKU, position sensing is not possible. If the application requires the load to be held during air loss, the piston will drift, so you must integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X160-50 FAQ
The theoretical maximum force is 50 kgf at 1.0 MPa. This bore features a 1/8" air port and a male M10x1.25 rod thread.
An external stop screw shortens the extend stroke by up to 50 mm on-site, while retract remains the full 160 mm. The screw only sets the end position and is not a mid-stroke lock. This SKU has no -S magnet, so it cannot take sensors, and the piston will drift on air loss unless you add an external rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X160-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.