Airtac MIJ Adjustable Cylinder MIJ25X200-100
The AirTAC MIJ Adjustable Cylinder MIJ25X200-100 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X200-100
Dial in your forward end position on the fly with the AirTAC MIJ25X200-100, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. An external stop screw lets you shorten the extend stroke by up to 100 mm on site, giving a usable forward range of 100 to 200 mm without changing the part number. Retract remains at the full 200 mm. The stop screw simply sets the end position; it is not a mid-stroke lock.
It uses the ISO 6432 mounting interface for easy bracket drops, features a 1/8" port, and relies on fixed TPU bumper pads to decelerate the stroke end. Note this SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ25X200-100 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X200-100 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X200-100
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X200-100 Is Used
Tolerance Take-up Stop
Fine-tune the forward stop by up to 100 mm to absorb fixture tolerances in a machining cell, letting the 12.5 kg vertical lift capacity handle light tool drops.
Adjustable Flap Folder
Set the exact extend position on-site to fold different box flap heights, using the fixed TPU bumpers to soften the end impact across changeovers.
Is the Airtac MIJ Adjustable Cylinder MIJ25X200-100 the Right Cylinder?
The 100 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds across changeover jobs. Remember that the piston drifts on air loss, so fit an external pilot check valve if you must hold a load vertically. Mount via LB foot, FA flange, or TC trunnion, as the SDB pivot block is not offered for this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X200-100 FAQ
The theoretical maximum force is 50 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 100 mm (usable range 100-200 mm); retract stays at the full 200 mm. This specific SKU has no magnet, so it cannot take CMSG/DMSG/EMSG sensors. You would need the -S variant for sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X200-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.