Airtac MIJ Adjustable Cylinder MIJ25X200-10S
The AirTAC MIJ Adjustable Cylinder MIJ25X200-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X200-10S
Trimming the forward end by up to 10 mm on site, this double-acting round-body mini cylinder lets you fine-tune the extend position from 190 to 200 mm without changing the unit. Retract travel remains full length.
Built with a stainless-steel barrel and rod for mild washdown resistance, it uses the ISO 6432 mounting interface and a 1/8" port. The -S suffix means a piston magnet is included for CMSG, DMSG or EMSG switches. Fixed TPU bumpers decelerate the stroke ends, while the external stop screw sets the forward position but acts as no mid-stroke lock.
Airtac MIJ Adjustable Cylinder MIJ25X200-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X200-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X200-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X200-10S Is Used
Sealing Head Positioning
Adjust the forward end on the fly to compensate for material thickness, applying a safe 147 N working load to seal packages cleanly.
Machining Tolerance Take-up
Fine-tune the forward stroke within the 190-200 mm window to press pins accurately, absorbing fixture deviations with 50 kgf max theoretical force.
Is the Airtac MIJ Adjustable Cylinder MIJ25X200-10S the Right Cylinder?
The 10 mm adjustment window here is ideal for taking up mechanical tolerances or staging feeds, letting one part number cover several stops. If the air supply drops, the piston drifts, so fit an external rod lock or pilot check valve for held loads.
Mounting options include LB foot, FA flange and TC trunnion, but the SDB pivot block is not available on this adjustable variant. Because this is the -S version, you can directly mount CMSG, DMSG or EMSG sensors for position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X200-10S FAQ
The theoretical maximum force is 50 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm, letting you set the exact forward end position; retract remains full. The -S suffix indicates a built-in piston magnet for CMSG, DMSG or EMSG sensors. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X200-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.