Airtac MIJ Adjustable Cylinder MIJ25X220-20S
The AirTAC MIJ Adjustable Cylinder MIJ25X220-20S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 220mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke220 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X220-20S
Dial in a precise forward end position on-site with the AirTAC MIJ25X220-20S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 20 mm, providing a usable forward range of 200 to 220 mm without swapping parts. The retract stroke remains full length.
This Ø25 mm unit conforms to the ISO 6432 mounting interface for standard mini brackets and features a 1/8" port with an M10x1.25 male rod thread. The stainless barrel and rod resist mild corrosion and washdown environments. Because this SKU includes the -S magnet, it supports CMSG, DMSG, and EMSG sensors for position detection. Fixed TPU bumper pads decelerate the piston at the stroke ends across a 30-800 mm/s speed range.
Airtac MIJ Adjustable Cylinder MIJ25X220-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X220-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 220 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X220-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X220-20S Is Used
Staged Part Pushing
Pushes components down a line at 245.3 N, using the 20 mm extend adjustment to dial in the exact ejection distance for varying product widths.
Carton Flap Folding
Folds packaging flaps on demand; the external stop screw fine-tunes the forward fold position to prevent crushing, handling about 12.5 kg vertical lift safely.
Tooling Changeover Stops
Acts as an adjustable mechanical stop for machining fixtures, allowing operators to switch between two forward end positions on the 220 mm stroke without changing cylinders.
Is the Airtac MIJ Adjustable Cylinder MIJ25X220-20S the Right Cylinder?
When sizing this 25 mm bore, stepping down to a 20 mm MIJ drops the 0.5 MPa push force to 157 N, while stepping up to a 32 mm bore increases it to 402 N. The 20 mm adjustment window is ideal for taking up mechanical tolerances during setup or covering several stop positions with one part number. The stop screw sets the extend end position but acts purely as an end stop, not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is not available), and use CMSG/DMSG/EMSG switches made possible by the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X220-20S FAQ
The theoretical maximum force is 50 kgf at 1.0 MPa. This bore uses a 1/8" air port and a 10 mm rod with an M10x1.25 male thread.
An external stop screw shortens the extend stroke by up to 20 mm on-site, giving a usable forward range of 200-220 mm; the retract stroke remains full. The -S suffix means a piston magnet is built-in, allowing you to mount CMSG, DMSG, or EMSG sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X220-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.