Airtac MIJ Adjustable Cylinder MIJ25X25-20S
The AirTAC MIJ Adjustable Cylinder MIJ25X25-20S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X25-20S
Trimming the forward end by up to 20 mm via an external stop screw, this double-acting round-body mini cylinder lets you dial in the exact extend position from 5 to 25 mm without changing parts. The retract stroke remains full.
Conforming to the ISO 6432 mounting interface for standard mini brackets, the unit features a 1/8" air port and M10x1.25 male rod thread. Because this SKU includes the -S magnet, it supports CMSG, DMSG and EMSG sensors for end-position detection. Fixed TPU bumper pads decelerate the piston at the stroke extremes.
Airtac MIJ Adjustable Cylinder MIJ25X25-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X25-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X25-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X25-20S Is Used
Staged Diverting
Adjust the forward stop on-site to alter the diverting depth for different carton widths without swapping out the entire cylinder.
Pallet Changeover
Fine-tune the extend end to trigger a 12.5 kg vertical lift mechanism precisely, accommodating varying pallet heights quickly.
Is the Airtac MIJ Adjustable Cylinder MIJ25X25-20S the Right Cylinder?
The 20 mm on-site stop window is ideal for taking up mechanical tolerances or staging feeds during changeovers. The stop screw sets the forward end position but is not a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load. Mount using LB foot, FA flange or TC trunnion brackets (SDB pivot-block is unavailable here).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X25-20S FAQ
The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8".
An external stop screw shortens the extend stroke by up to 20 mm on-site, while the retract stroke remains full. The built-in -S magnet allows CMSG, DMSG and EMSG sensors to detect piston position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X25-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.