Airtac MIJ Adjustable Cylinder MIJ25X35-20S
The AirTAC MIJ Adjustable Cylinder MIJ25X35-20S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 35mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X35-20S
Dial in a precise forward end position on-site with the AirTAC MIJ25X35-20S, a round-body stainless steel mini cylinder featuring a 20 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward travel from its 35 mm nominal length down to 15 mm without swapping components, while retract remains full stroke. Built with a riveted stainless barrel and rod, it handles mild washdown environments and conforms to the ISO 6432 mounting interface for standard mini brackets.
The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors, and the 1/8" air port supplies the volume needed for its 30-800 mm/s speed range.
Airtac MIJ Adjustable Cylinder MIJ25X35-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X35-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X35-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X35-20S Is Used
Multi-Stop Forming Press
Use the adjustable forward end position to create staged material stops for different bend depths, leveraging the 12.5 kg vertical lift capacity to hold workpieces.
Variable Depth Carton Sealing
Fine-tune the forward stroke on the fly to match fluctuating package heights without changing cylinders, relying on the fixed TPU bumper pads to soften the impact.
Is the Airtac MIJ Adjustable Cylinder MIJ25X35-20S the Right Cylinder?
Choose the MIJ25 when your application requires that middle ground of 245.3 N. The 20 mm external stop screw is ideal for taking up mechanical tolerances or staging feeds, allowing one part number to cover several intermediate stops. Remember that the stop screw only trims the extend end; it is not a mid-stroke lock. The piston will drift on air loss, so fit an external rod lock or pilot check valve if you need to hold a suspended load.
Mounting options include LB foot brackets, FA flanges, and TC trunnions, but the SDB pivot block is not available on this adjustable-stroke variant. Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG switches for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X35-20S FAQ
This 25 mm bore cylinder uses a 1/8" air port and a male M10x1.25 rod thread.
An external stop screw shortens the extend stroke by up to 20 mm on-site, giving a usable forward range of 15 to 35 mm, while retract remains full stroke. The -S suffix means it has a built-in piston magnet for CMSG, DMSG, or EMSG sensors. The stainless steel build provides mild corrosion resistance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X35-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.