Airtac MIJ Adjustable Cylinder MIJ25X60-20
The AirTAC MIJ Adjustable Cylinder MIJ25X60-20 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X60-20
Dial in a precise forward end position on-site with the AirTAC MIJ25X60-20, a double-acting round-body mini cylinder featuring a 20 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke from its 60 mm nominal length down to 40 mm, absorbing setup tolerances and accommodating multiple stopping points from a single part number without changing the cylinder. Retract remains at the full stroke length.
Built with a stainless-steel barrel and piston rod, this riveted construction resists mild corrosion and washdown environments while conforming to the ISO 6432 mounting interface for standard mini brackets. The 1/8" port and M10x1.25 male rod thread handle robust airflow and mounting, while fixed TPU bumper pads decelerate the stroke ends across the 30-800 mm/s speed range.
Airtac MIJ Adjustable Cylinder MIJ25X60-20 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X60-20 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X60-20
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X60-20 Is Used
Staged Diverting
Fine-tune the 40-60 mm extend stroke to push varying carton sizes onto divert lanes without repositioning the cylinder bracket.
Light Press Fit
Press small bearings or pins to a precise depth using the external stop screw, ensuring the 12.5 kg load capacity is not exceeded.
Is the Airtac MIJ Adjustable Cylinder MIJ25X60-20 the Right Cylinder?
The 20 mm external adjuster is ideal for taking up mechanical tolerances during changeovers, letting you fine-tune the extend endpoint without swapping hardware. Mount using LB foot, FA flange, or TC trunnion brackets—note the SDB pivot block is not offered on this adjustable variant. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors; choose the -S version if you require position sensing.
Keep in mind the stop screw only sets the forward end position; it is not a mid-stroke lock. The cylinder will drift and drop its load on air loss, as the fixed TPU bumpers only soften the impact at the stroke extremes. For holding a suspended load vertically, integrate an external rod lock or pilot-operated check valve into your circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X60-20 FAQ
This 25 mm bore cylinder uses a 1/8" port. The theoretical maximum force is 50 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 20 mm on-site; retract remains full. This SKU has no -S magnet, so it cannot take sensors. The stop screw is not a mid-stroke lock, and the cylinder drifts on air loss—use a pilot check valve to hold loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X60-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.