Airtac MIJ Adjustable Cylinder MIJ25X60-30
The AirTAC MIJ Adjustable Cylinder MIJ25X60-30 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X60-30
Dial in your forward end position on the fly with the AirTAC MIJ25X60-30, a round-body stainless steel mini cylinder that lets an external stop screw shorten the extend stroke by up to 30 mm. You get a usable forward range of 30 to 60 mm without changing the actuator, while retract remains at the full 60 mm. Built with a riveted stainless barrel and piston rod, it handles mild washdown and corrosion exposure well. It conforms to the ISO 6432 mounting interface for Ø8-Ø25 bores, dropping directly into standard mini brackets and clevises.
Air connects via a 1/8" port, and the Ø10 rod uses an M10x1.25 male thread. This SKU lacks the -S magnet, so it cannot host CMSG, DMSG or EMSG sensors. Fixed TPU bumper pads absorb the stroke end impacts across the 30-800 mm/s speed range.
Airtac MIJ Adjustable Cylinder MIJ25X60-30 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X60-30 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X60-30
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X60-30 Is Used
Variable Depth Sealing
Adjust the forward end position for various box sizes on a sealing head, relying on the fixed TPU bumpers to cushion the stroke end at up to 800 mm/s.
Is the Airtac MIJ Adjustable Cylinder MIJ25X60-30 the Right Cylinder?
The 30 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds across changeover jobs, letting one part number cover several intermediate stops. Remember the stop screw only trims the extend end; it is not a mid-stroke lock. If the application must hold a load on air loss, fit an external rod lock or pilot check valve, as the piston will drift. Mount using LB foot, FA flange or TC trunnion (SDB is unavailable here).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X60-30 FAQ
This 25 mm bore cylinder uses a 1/8" port and an M10x1.25 male rod thread. The theoretical maximum force is 50 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 30 mm, giving a usable forward range of 30-60 mm; the retract stroke remains fixed at 60 mm. This specific SKU has no magnet (-S omitted), so it cannot accept CMSG, DMSG or EMSG sensors. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X60-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.