Airtac MIJ Adjustable Cylinder MIJ25X60-50S
The AirTAC MIJ Adjustable Cylinder MIJ25X60-50S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X60-50S
Dial in a precise forward end position on-site with the AirTAC MIJ25X60-50S, a round-body stainless-steel mini cylinder that lets an external stop screw shorten the extend stroke by up to 50 mm from its 60 mm nominal length. Because the adjuster trims only the forward end, you get a usable 10-60 mm extension while retract remains a full stroke, letting one part number cover multiple stop distances without swapping hardware. Built with a riveted stainless barrel and rod, it withstands mild washdowns and corrosion.
It uses the ISO 6432 mounting interface for standard mini brackets and includes a piston magnet (-S) for CMSG, DMSG or EMSG sensors. Fixed TPU bumpers decelerate the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ25X60-50S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X60-50S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X60-50S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X60-50S Is Used
Adjustable Feed Gate
Regulates carton flow on a conveyor by trimming the extend stroke up to 50 mm on-site, matching varying package widths without changing the cylinder.
Tolerance Take-Up Press
Applies a precise 147 N holding force against machined parts, using the stop screw to absorb mechanical tolerances and dial in the exact contact point.
Is the Airtac MIJ Adjustable Cylinder MIJ25X60-50S the Right Cylinder?
When sizing this unit against adjacent bores, stepping down to a Ø20 MIJ drops the 0.5 MPa push force to 157 N, while stepping up to a Ø32 raises it to 402 N. Choose this Ø25 model when your mechanism needs around 147 N of safe working force and benefits from on-the-fly tolerance take-up via the 50 mm adjustment window. The external screw is purely an end-position setter, not a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve if you must hold a suspended load.
For mounting, you can use LB foot, FA flange or TC trunnion brackets, plus CA, U, R or CM back covers, but the SDB pivot block is not offered on this adjustable variant. The built-in magnet (-S) directly supports CMSG, DMSG and EMSG position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X60-50S FAQ
Its theoretical maximum force is 50 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 50 mm, letting you set the forward end position without affecting the full retract stroke. The -S suffix means it has a built-in piston magnet for CMSG, DMSG or EMSG sensors, and the stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.