Airtac MIJ Adjustable Cylinder MIJ25X75-10S
The AirTAC MIJ Adjustable Cylinder MIJ25X75-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X75-10S
Dial in your forward end position on-site with the AirTAC MIJ25X75-10S, a double-acting round-body mini cylinder featuring a 10 mm extend-stroke adjustment window. An external stop screw lets you trim the forward stroke from 65 to 75 mm without swapping parts, while the retract stroke remains full. The stainless-steel barrel and piston rod supply mild corrosion and washdown resistance for demanding industrial environments.
It uses a 1/8" port and a male M10x1.25 rod thread. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position sensing.
Airtac MIJ Adjustable Cylinder MIJ25X75-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X75-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X75-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X75-10S Is Used
Feed Depth Calibration
Trim the 75 mm extend stroke by up to 10 mm to set exact material feed depths on a machining line, absorbing tool wear without replacing the cylinder.
Staged Diverting
Use the on-site adjustment to set precise diverting positions for parts on a conveyor, leveraging the 12.5 kg vertical lift capacity for reliable sorting.
Is the Airtac MIJ Adjustable Cylinder MIJ25X75-10S the Right Cylinder?
The adjuster trims the extend end only; it is not a mid-stroke lock. If your application must hold a load vertically during air loss, add an external rod lock or pilot check valve, as the piston will drift. Mounting options include LB foot, FA flange, and TC trunnion brackets (the SDB pivot block is not offered on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X75-10S FAQ
The theoretical maximum force is 50 kgf at 1.0 MPa. This Ø25 bore uses a 1/8" air port and a Ø10 mm piston rod.
An external stop screw shortens the extend stroke by up to 10 mm on-site, letting you set the forward end position without changing the cylinder. Retract remains full stroke. The -S suffix means it has a built-in piston magnet for CMSG, DMSG, or EMSG sensors. Deceleration is handled by fixed TPU bumper pads, not an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.