Airtac MIJ Adjustable Cylinder MIJ25X75-20S
The AirTAC MIJ Adjustable Cylinder MIJ25X75-20S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X75-20S
Trimming the forward end position by up to 20 mm via an external stop screw, this double-acting stainless mini cylinder lets you fine-tune the extend stroke from 55 to 75 mm directly on the machine. Retract remains at the full 75 mm. The built-in -S piston magnet enables CMSG, DMSG, or EMSG position sensing.
Built to the ISO 6432 mounting interface, the Ø25 mm round-body barrel and Ø10 mm rod are riveted stainless steel for mild washdown resistance. Pneumatic supply connects via a 1/8" port, and fixed TPU bumpers absorb the stroke end impact.
Airtac MIJ Adjustable Cylinder MIJ25X75-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X75-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X75-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X75-20S Is Used
Carton Flap Folding
Fine-tune the folding arm stop on-site to accommodate different carton depths without changing cylinders, relying on the 12.5 kg vertical lift capacity.
Light Pressing Jigs
Set the precise forward end position for pressing small bearings or pins, absorbing end-impact with fixed TPU bumpers while the -S magnet confirms stroke completion.
Is the Airtac MIJ Adjustable Cylinder MIJ25X75-20S the Right Cylinder?
The 20 mm adjustment window here is ideal for taking up mechanical tolerances or matching multiple part stops without swapping hardware. Remember the stop screw only sets the forward endpoint; it is not a mid-stroke lock, so fit an external pilot check valve if the load must hold position on air loss. You can use LB, FA, or TC mounts (SDB is excluded on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X75-20S FAQ
The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.
An external stop screw shortens the extend stroke by up to 20 mm (usable extend 55-75 mm), while retract stays at the full 75 mm. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors. The stainless steel riveted build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X75-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.