Airtac MIJ Adjustable Cylinder MIJ25X75-30S
The AirTAC MIJ Adjustable Cylinder MIJ25X75-30S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X75-30S
Dial in your forward end position on the fly with the AirTAC MIJ25X75-30S, a round-body stainless steel mini cylinder that lets an external stop screw shorten the extend stroke by up to 30 mm. You get a usable forward range of 45 to 75 mm without changing the unit, while retract remains full. The -S suffix means a piston magnet is built in for position sensing.
The 1/8" port and M10x1.25 male rod thread handle robust airflow, while the stainless barrel and rod resist mild corrosion and washdown environments.
Airtac MIJ Adjustable Cylinder MIJ25X75-30S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X75-30S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X75-30S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X75-30S Is Used
Staged Feed Diverter
Trim the extend stroke up to 30 mm to nudge packages of varying widths onto secondary lines without swapping actuators.
Adjustable Sealing Jaw
Set precise end positions for carton sealing heads, altering the 45 to 75 mm reach on site to accommodate different box heights.
Is the Airtac MIJ Adjustable Cylinder MIJ25X75-30S the Right Cylinder?
When sizing this 25 mm bore, stepping down to a 20 mm MIJ drops the 0.5 MPa push force to 157 N, whereas moving up to a 32 mm bore raises it to 402 N. The 30 mm adjustment window is invaluable for taking up mechanical tolerances or staging feeds, letting one part number cover several intermediate stops. The stop screw sets the end position but is not a mid-stroke lock.
Because a plain cylinder drifts on air loss, hold suspended loads with an external rod lock or pilot check valve. Mount via LB foot, FA flange, or TC trunnion (SDB is unavailable here), and pair the -S magnet with CMSG, DMSG, or EMSG switches for sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X75-30S FAQ
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical max force is 50 kgf at 1.0 MPa. The air port is 1/8".
An external screw shortens the extend stroke by up to 30 mm, but retract stays full. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X75-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.