Airtac MIJ Adjustable Cylinder MIJ25X75-50
The AirTAC MIJ Adjustable Cylinder MIJ25X75-50 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X75-50
Dial in a precise forward end position on the factory floor with the AirTAC MIJ25X75-50, a double-acting round-body mini cylinder built from stainless steel. An external stop screw lets you shorten the extend stroke by up to 50 mm on site, yielding a usable forward travel of 25 to 75 mm without swapping parts. Retract travel remains the full 75 mm. The stainless barrel and rod resist mild corrosion and washdown environments.
It conforms to the ISO 6432 mounting interface for easy bracket drops, uses a 1/8" port, and relies on fixed TPU bumper pads to decelerate the stroke end. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ25X75-50 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X75-50 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X75-50
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X75-50 Is Used
Staged Feed Diverter
Trim the extend stroke by up to 50 mm to push varying carton widths onto downstream lanes without changing the cylinder.
Adjustable Pack Press
Fine-tune the forward stop on site to compress different package heights, safely moving about 12.5 kg of vertical load.
Is the Airtac MIJ Adjustable Cylinder MIJ25X75-50 the Right Cylinder?
The 50 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds across changeover jobs. Remember the stop screw only trims the extend end; it is not a mid-stroke lock. The piston will drift on air loss, so fit an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange, or TC trunnion, as the SDB pivot block is not offered on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X75-50 FAQ
The theoretical max force is 50 kgf at 1.0 MPa, and the air port is 1/8".
An external stop screw shortens the extend stroke by up to 50 mm on site, while retract remains the full 75 mm. The screw sets the end position but is not a mid-stroke lock; the piston drifts on air loss. This SKU has no magnet, so it cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X75-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.