Airtac MIJ Adjustable Cylinder MIJ32X30-30H
The AirTAC MIJ Adjustable Cylinder MIJ32X30-30H is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X30-30H
Trimming the forward end by up to 30 mm via an external stop screw, the AirTAC MIJ32X30-30H lets operators dial in the exact extend position without swapping hardware.
Built with a stainless-steel barrel and rod for mild washdown resistance, it features a 1/8" port, a Ø12 mm rod, and a male M10x1.25 thread. This non-ISO-6432 Ø32 bore runs on fixed TPU bumper pads and includes a high-temp Viton/FKM (-H) seal. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ32X30-30H Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X30-30H |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X30-30H
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X30-30H Is Used
Press Fit Dialing
Micro-adjust the 0-30 mm extend stop to set precise pressing depths for 402.2 N insertion tasks without reprogramming machine logic.
Variable Length Diverter
Tune the extend stroke on-site to deflect differently sized packages on a line, using the bumper pads to soften the end impact.
Staged Parts Ejection
Shorten the forward stroke to push parts into a secondary fixture, leveraging the 20.5 kg vertical lift capacity for changeovers.
Is the Airtac MIJ Adjustable Cylinder MIJ32X30-30H the Right Cylinder?
The 30 mm adjustment window here is ideal for taking up mechanical tolerances or staging feeds during changeovers. The stop screw sets the extend endpoint but does not function as a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load. Mounting options include LB, FA, and TC styles (SDB is unavailable on this adjustable type).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X30-30H FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical max force is 82 kgf at 1.0 MPa. It uses a 1/8" port with a Ø12 mm rod and M10x1.25 male thread.
An external stop screw shortens the extend stroke by up to 30 mm on-site; retract remains full. The -H denotes a Viton/FKM high-temperature seal. This SKU has no -S magnet, so magnetic position sensors are incompatible.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X30-30H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.