Airtac MIJ Adjustable Cylinder MIJ32X75-30H
The AirTAC MIJ Adjustable Cylinder MIJ32X75-30H is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X75-30H
Dial in a precise forward end position on-site with the AirTAC MIJ32X75-30H, a round-body stainless mini cylinder featuring a 30 mm extend adjustment window. An external stop screw lets you shorten the forward stroke from its 75 mm nominal maximum down to 45 mm, absorbing setup tolerances without swapping parts. The -H designation equips it with a Viton/FKM seal variant for elevated thermal demands.
Built with a riveted stainless-steel barrel and rod, the unit withstands mild corrosion and washdown environments. It relies on fixed TPU bumper pads to decelerate the stroke end, operating at speeds of 30-800 mm/s. Note that Ø32 is a non-ISO-6432 size, and this specific SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ32X75-30H Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X75-30H |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X75-30H
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X75-30H Is Used
High-Heat Divert Gate
Leveraging the Viton/FKM seals for elevated ambient temperatures, this cylinder actuates a routing gate on a conveyor, using the adjustable forward end to dial in the divert angle.
Variable Depth Carton Stop
Halts corrugated cartons on a packing line; operators twist the external screw to shorten the extend stroke by up to 30 mm, accommodating different box widths without changing tooling.
Is the Airtac MIJ Adjustable Cylinder MIJ32X75-30H the Right Cylinder?
The 30 mm external stop screw is invaluable for changeover jobs or taking up mechanical tolerance, letting one part number cover several intermediate stops. Remember that the adjuster trims the extend stroke only; retract remains full.
Mounting options include LB foot, FA flange, and TC trunnion brackets, but the SDB pivot-block is not available on this adjustable variant. Because this is a non-magnetic SKU, position sensing is not supported. Furthermore, the stop screw sets the end position but acts as no mid-stroke lock; the piston will drift on air loss, so integrate an external rod lock or pilot check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X75-30H FAQ
The theoretical maximum force is 82 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 30 mm on-site, yielding a usable forward range of 45-75 mm; retract remains full. The -H indicates a Viton/FKM high-temperature seal. This SKU has no magnet, so CMSG/DMSG/EMSG sensors cannot be fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X75-30H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.