Airtac MIJ Adjustable Cylinder MIJ40X10-10
The AirTAC MIJ Adjustable Cylinder MIJ40X10-10 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø40mm bore and 10mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke10 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ40X10-10
Dial in exact forward end positions on-site with the AirTAC MIJ40X10-10, a round-body stainless mini cylinder featuring a 10 mm extend-stroke adjustment window. An external stop screw lets you trim the forward stroke by up to 10 mm without swapping components, while the retract stroke remains full length.
This double-acting actuator uses fixed TPU bumper pads to decelerate the stroke end and operates at speeds of 30-800 mm/s. Pneumatic connections use a 1/4" port with an M12x1.25 male rod thread. Note that this SKU lacks a magnet and cannot host position sensors; adding the -S variant enables CMSG, DMSG, or EMSG switches.
Airtac MIJ Adjustable Cylinder MIJ40X10-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ40X10-10 |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ40X10-10
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ40X10-10 Is Used
Heavy Clamping Press
Apply up to 628.3 N of clamping force while using the 10 mm stop screw to dial in the exact material compression distance for varying workpiece thicknesses.
Staged Diverter Gate
Divert heavy packages on a washdown line; the stainless build resists moisture while the adjustable forward end fine-tunes the gate angle for different product sizes.
Pallet Stopper Block
Halt pallets securely using the 32 kg vertical lift capacity, tweaking the extend position on-site to accommodate pallets of varying overhang without changing hardware.
Is the Airtac MIJ Adjustable Cylinder MIJ40X10-10 the Right Cylinder?
The 10 mm extend adjustment is ideal for taking up mechanical tolerances during setup or covering multiple short-stop jobs with one part number. Keep in mind the stop screw sets the end position but acts as neither a mid-stroke lock nor a brake; the piston will drift on air loss, so utilize an external rod lock or pilot check valve for holding suspended loads. Mounting options include LB foot, FA flange, and TC trunnion styles, but the SDB pivot block is not offered on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ40X10-10 FAQ
This 40 mm bore cylinder features a 1/4" pneumatic port and an M12x1.25 male rod thread.
An external stop screw shortens the extend stroke by up to 10 mm on-site, allowing precise forward positioning without replacing the cylinder; the retract stroke remains full. This screw is not a mid-stroke lock, and the cylinder drifts on air loss, so an external rod lock is required for holding loads. Additionally, this non-S SKU lacks a magnet and cannot support sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ40X10-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.