Airtac MIJ Adjustable Cylinder MIJ40X100-50S
The AirTAC MIJ Adjustable Cylinder MIJ40X100-50S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø40mm bore and 100mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ40X100-50S
Dial in your forward end position on-site with the AirTAC MIJ40X100-50S, a round-body stainless steel mini cylinder featuring a 50 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke anywhere from the 100 mm nominal maximum down to 50 mm, absorbing setup tolerances and covering multiple stop points with a single part number. Retract remains at the full stroke length.
It uses a 1/4" port and fixed TPU bumper pads to decelerate the stroke end. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position sensing. Note that Ø40 is a non-ISO-6432 size.
Airtac MIJ Adjustable Cylinder MIJ40X100-50S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ40X100-50S |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ40X100-50S
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ40X100-50S Is Used
Staged Diverting
Sort heavy cartons on a packaging line by setting the forward stop position to match specific lane angles, utilizing the 32 kg vertical lift capacity for reliable plow positioning.
Pallet Changeover
Adjust the extend end position on the fly to handle different pallet heights in an automated storage system, relying on the stainless construction to endure dusty or humid warehouse environments.
Is the Airtac MIJ Adjustable Cylinder MIJ40X100-50S the Right Cylinder?
The 50 mm external stop screw is ideal for fine-tuning part ejection or staged feeds without machining new hard stops.
Mounting options include LB foot, FA flange, and TC trunnion, along with CA, U, R, and CM back covers (the SDB pivot block is not offered on this adjustable variant). Remember that the stop screw sets the end position but acts purely as a mechanical limit—it is not a mid-stroke lock. The piston will drift on air loss, so add an external rod lock or pilot check valve if you need to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ40X100-50S FAQ
The theoretical maximum force is 128.1 kgf at 1.0 MPa.
The external stop screw shortens the extend stroke by up to 50 mm (usable forward range 50-100 mm), while retract remains full. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors. Fixed TPU bumpers decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ40X100-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.