Airtac MIJ Adjustable Cylinder MIJ40X40-10
The AirTAC MIJ Adjustable Cylinder MIJ40X40-10 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø40mm bore and 40mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke40 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ40X40-10
Dial in your forward end position on-site with the AirTAC MIJ40X40-10, a round-body stainless steel mini cylinder featuring a 10mm adjustable extend window. An external stop screw lets you trim the forward stroke from 40mm down to 30mm, absorbing setup tolerances without changing the part number. Retract remains full length. Built with a riveted stainless barrel and rod, it handles mild corrosion and washdown environments.
It uses a 1/4" port and a 16mm rod. Note this is a non-ISO-6432 size. Fixed TPU bumpers decelerate the stroke ends, and because this SKU lacks a magnet, it cannot host CMSG/DMSG/EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ40X40-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ40X40-10 |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ40X40-10
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ40X40-10 Is Used
Heavy Diverter Gate
Trim the 40mm extend stroke by up to 10mm to hit the exact angle needed to redirect heavy packages without re-engineering the mount.
Is the Airtac MIJ Adjustable Cylinder MIJ40X40-10 the Right Cylinder?
The 10mm extend adjuster is ideal for taking up mechanical tolerances during changeovers. Mount via LB foot, FA flange, or TC trunnion, as the SDB pivot block is excluded here. The stop screw sets the forward endpoint but is not a mid-stroke lock; the piston drifts on air loss, so fit an external rod lock for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ40X40-10 FAQ
At 0.5MPa it pushes 628.3N and pulls 527.8N; at 0.7MPa it pushes 879.6N and pulls 738.9N. The theoretical max is 128.1kgf at 1.0MPa. It uses a 1/4" port with a 16mm rod.
An external screw shortens the extend stroke by up to 10mm on-site; retract is unaffected. This SKU has no magnet, so CMSG/DMSG/EMSG sensors cannot be fitted. Fixed TPU bumpers decelerate the ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ40X40-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.