Airtac MIJ Adjustable Cylinder MIJ40X450-75S
The AirTAC MIJ Adjustable Cylinder MIJ40X450-75S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø40mm bore and 450mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke450 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ40X450-75S
Dial in a precise forward end position on-site with the AirTAC MIJ40X450-75S, a round-body stainless mini cylinder featuring a 75mm extend-stroke adjustment window. An external stop screw lets you shorten the forward travel anywhere from 375mm to 450mm, allowing one part number to cover multiple stop distances without swapping hardware. Retract travel remains full length.
The built-in magnet (-S) supports CMSG, DMSG, and EMSG position switches.
Airtac MIJ Adjustable Cylinder MIJ40X450-75S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ40X450-75S |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 450 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ40X450-75S
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ40X450-75S Is Used
Staged Diverting
Set specific extend stops between 375mm and 450mm to push varying carton sizes onto secondary packaging lines without changing cylinders.
Tolerance Take-Up
Fine-tune the extend end position during machine changeovers, absorbing cumulative mechanical tolerances across a 450mm parts feeding cycle.
Is the Airtac MIJ Adjustable Cylinder MIJ40X450-75S the Right Cylinder?
The 75mm external adjuster is ideal for taking up mechanical tolerances during setup or matching multiple staged feed distances. Remember the stop screw only trims the extend end; it is not a mid-stroke lock.
Because a standard pneumatic cylinder drifts on air loss, install an external rod lock or pilot-operated check valve if the load must be held. Mount using LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is not available on this adjustable variant). The -S magnet enables CMSG/DMSG/EMSG sensors for exact end-position confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ40X450-75S FAQ
The theoretical maximum force is 128.1kgf at 1.0MPa.
An external stop screw shortens the extend stroke by up to 75mm (usable forward travel 375-450mm); retract remains full. The -S suffix means a piston magnet is built-in for CMSG/DMSG/EMSG sensors. The stainless build resists mild washdown environments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ40X450-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.