Airtac MIJ Adjustable Cylinder MIJ40X60-10S
The AirTAC MIJ Adjustable Cylinder MIJ40X60-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ40X60-10S
Trimming the forward end position by up to 10 mm on-site, the AirTAC MIJ40X60-10S lets you fine-tune a 60 mm extend stroke without swapping out the actuator. This double-acting, round-body mini cylinder features a stainless-steel barrel and piston rod to resist mild corrosion and washdown environments.
The 1/4" port and M12x1.25 male rod thread provide robust connectivity for heavier tooling. Because this is a -S SKU, the built-in piston magnet supports CMSG, DMSG, and EMSG position switches.
Airtac MIJ Adjustable Cylinder MIJ40X60-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ40X60-10S |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ40X60-10S
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ40X60-10S Is Used
Heavy Diverter Gate
Trim the extend stroke by up to 10 mm to set the exact deflection angle of a heavy package routing gate without machining new hard stops.
Staged Component Feed
Push parts into a machining fixture with a 60 mm stroke, using the external screw to fine-tune the insertion depth for delicate tooling setups.
Is the Airtac MIJ Adjustable Cylinder MIJ40X60-10S the Right Cylinder?
The external stop screw is ideal for taking up mechanical tolerances during setup or covering multiple stop positions with a single part number. Note that the stop screw sets the extend endpoint but does not function as a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve for holding loads. Mounting options include LB foot, FA flange, and TC trunnion (the SDB pivot block is unavailable here), and the -S magnet enables CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ40X60-10S FAQ
The theoretical maximum force is 128.1 kgf at 1.0 MPa, and the air port is 1/4".
An external stop screw shortens the extend stroke by up to 10 mm on-site, while the retract stroke remains full. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, and EMSG sensors. Fixed TPU bumper pads decelerate the stroke end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ40X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.