Airtac MIJ Adjustable Cylinder MIJ40X80-10S
The AirTAC MIJ Adjustable Cylinder MIJ40X80-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø40mm bore and 80mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ40X80-10S
Dial in your forward end position on-site with the AirTAC MIJ40X80-10S, a round-body stainless mini cylinder featuring a 10 mm extend-stroke adjustment window. Because the external stop screw trims only the forward stroke, you can fine-tune the 80 mm extend travel down to 70 mm without swapping parts. The stainless-steel barrel and piston rod resist mild corrosion and washdown environments.
The 1/4" air port and M12x1.25 male rod thread handle robust air flows and mounting loads. It uses fixed TPU bumper pads to decelerate the stroke end.
Airtac MIJ Adjustable Cylinder MIJ40X80-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ40X80-10S |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ40X80-10S
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ40X80-10S Is Used
Heavy Diverter Gate
Position heavy package routing gates on a conveyor.
Carton Flap Folder
Fold heavy corrugated carton flaps during case packing. The stainless build survives dusty washdown zones, and the adjustable forward stop lets you switch carton sizes without changing cylinders.
Vertical Press Plunger
Drive a light assembly press downward.
Is the Airtac MIJ Adjustable Cylinder MIJ40X80-10S the Right Cylinder?
If you need even more power, note that Ø40 is the largest available bore in this series. The 10 mm external stop screw is ideal for taking up mechanical tolerances or matching multiple stop points across a machine using a single part number.
Remember that the stop screw sets the end position but is not a mid-stroke lock; the piston will drift if air pressure is lost, so add an external rod lock or pilot check valve for holding vertical loads. You can mount this unit using LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is not available). The built-in -S magnet allows direct mounting of CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ40X80-10S FAQ
The theoretical maximum force is 128.1 kgf at 1.0 MPa. It uses a 1/4" air port and a Ø16 mm rod with an M12x1.25 male thread.
The external stop screw shortens the extend stroke by up to 10 mm on-site, allowing you to set the forward end position between 70 and 80 mm; the retract stroke remains full. The -S suffix indicates a built-in piston magnet, enabling the use of CMSG, DMSG, or EMSG reed or electronic switches. Fixed TPU bumpers decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ40X80-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.