This model is discontinued
AirTAC has phased out the MTAL series. You can still order this code here: we ship the direct replacement MTBL25X75CA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL25X75CA
The AirTAC MTAL Rear Single Acting Mini Cylinder MTAL25X75CA is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø25mm bore and 75mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the direct replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL25X75CA.
- BoreØ25 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeSingle acting, pull (spring extend)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL25X75CA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL25X75CA
The AirTAC MTAL25X75CA is a discontinued single-acting pull cylinder with a 25mm bore and 75mm stroke. Air retracts the rod while an internal spring extends it, yielding a fail-safe extended home position. It delivers a usable pull force of 137.2 N at 0.5 MPa. The direct replacement is the MTBL25X75CA, matching the bore, stroke, CA clevis, and G1/8 port.
This MTAL25X75CA lacks a magnet (-S) and cannot accept a position sensor. The original uses a CS1-M/DS1-M sensor family and threaded covers, whereas the MTBL upgrade features a riveted rolling-packed body and CMSG/DMSG/EMSG switches. A fixed rubber bumper absorbs end-of-stroke impact. The CA back cover provides a pivot clevis for arcing loads.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL25X75CA Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL25X75CA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL25X75CA |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL25X75CA carries the same single-acting ratings.
Usable Pull Force (Ø25mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 137.2 N |
| 0.7 MPa | 219.6 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL25X75CA
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL25X75CA Is Used
Packaging Flap Folder
Draws back a cardboard folding arm during the 75mm stroke. The 137.2 N pull at 0.5 MPa overcomes hinge friction, while the spring-extended fail-safe parks the arm clear of the conveyor.
Textile Tension Gate
Retracts a yarn tensioning gate out of the thread path. The CA pivot clevis accommodates the lever arc, and the spring extends the gate to a safe open position if the 0.2 MPa air supply drops.
Lathe Chuck Guard
Pulls a safety guard closed during spindle spin-up. With no magnet on this SKU, you rely on the extended fail-safe home to lock the guard open mechanically for operator access.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL25X75CA with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL25X75CA
To replace the MTAL25X75CA, specify the MTBL25X75CA. Confirm the 25mm bore, 75mm stroke, G1/8 port, PT thread, and CA pivot back cover. Because this SKU lacks the -S magnet, it cannot take a sensor; if you need sensing on the MTBL, add the S code for CMSG/DMSG/EMSG switches. Remember the 0.2 MPa minimum operating pressure and apply no external load on the spring extend stroke. On air loss, the spring pushes the rod out to the extended fail-safe home.
For sizing flexibility, stepping down to the 20mm bore drops the 0.5 MPa pull force to 81.7 N, while stepping up to the 32mm bore increases it to 261.2 N. The CA pivot clevis is ideal for applications requiring arc movement, and the fixed rubber bumper requires no adjustment.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL25X75CA (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL25X75CA instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL25X75CA FAQ
Yes, the MTAL25X75CA is discontinued. The direct replacement is the MTBL25X75CA, matching the 25mm bore, 75mm stroke, CA clevis, and G1/8 port. The MTBL upgrades the body to a riveted rolling-packed design but retains the same force class.
This single-acting pull cylinder provides a usable pull force of 137.2 N at 0.5 MPa and 219.6 N at 0.7 MPa, with a maximum standard stroke of 100mm. Air retracts the rod, but on air loss, the internal spring pushes the rod to the extended fail-safe home position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL25X75CA replaces this model 1:1.
Fast Dispatch
MTBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL25X75CA → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL25X75CA)
Tell us the quantity and destination — we quote the direct AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL25X75CA replacement with price, stock and lead time, usually within 7-8 hours.