This model is discontinued
AirTAC has phased out the MTAL series. You can still order this code here: we ship the direct replacement MTBL32X75CM, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CM
The AirTAC MTAL Rear Single Acting Mini Cylinder MTAL32X75CM is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø32mm bore and 75mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the direct replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CM.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeSingle acting, pull (spring extend)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CM
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CM
The AirTAC MTAL32X75CM is a discontinued single-acting pull-type mini cylinder. Air retracts the rod, while an internal spring extends it. The direct replacement is the MTBL32X75CM. It shares the 32mm bore, 75mm stroke, CM round-end back cover, and G1/8 port. This bore yields a usable pull force of 261.2 N at 0.5 MPa. The fail-safe home is extended.
This MTAL features a fixed rubber bumper and threaded covers. The MTBL upgrade uses a riveted rolling-packed body. This SKU lacks the -S magnet, so it cannot take a position sensor. The MTBL upgrade adds CMSG/DMSG/EMSG sensor compatibility. Apply no external load on the spring-extend stroke.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CM Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CM |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CM carries the same single-acting ratings.
Usable Pull Force (Ø32mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 261.2 N |
| 0.7 MPa | 399.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CM
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CM Is Used
Textile Loom Tension Gate
Pulls a yarn tensioning gate closed during weaving cycles. The 261.2 N pull at 0.5 MPa handles the tension, while the spring-extend fail-safe opens the gate on air loss.
CNC Lathe Chuck Guard
Retracts a chip-deflection guard during automated bar feeding. The 75mm stroke clears the work area, and the extended fail-safe blocks the spindle on air loss.
Packaging Carton Flap
Draws back a carton flap applicator arm. The 32mm bore provides precise pull force, and the spring-extend design parks the arm safely away from the conveyor.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CM with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CM
Replace the MTAL32X75CM with the MTBL32X75CM. Confirm the 32mm bore, 75mm stroke, G1/8 port, PT thread, M10x1.25 rod-end, and CM round-end back cover. Note the minimum 0.2 MPa working pressure. The fail-safe home is extended. If sizing down, the 25mm bore offers 137.2 N pull at 0.5 MPa. If sizing up, the 40mm bore offers 439.4 N pull at 0.5 MPa. The 75mm stroke is under the 100mm limit, so rod-bending risk is low. The MTBL lacks the -S magnet, so it cannot take a sensor.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CM (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CM instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CM FAQ
Yes, the MTAL32X75CM is discontinued. The direct replacement is the MTBL32X75CM. It matches the 32mm bore, 75mm stroke, G1/8 port, and CM back cover. The MTBL uses a riveted body instead of threaded covers, and supports CMSG/DMSG/EMSG sensors.
It is a single-acting pull cylinder, so air retracts the rod and the spring extends it. The fail-safe home is extended. The usable pull force is 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa. The maximum force is 40.7 kgf at 1.0 MPa. It requires a minimum of 0.2 MPa to operate.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CM replaces this model 1:1.
Fast Dispatch
MTBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CM → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CM)
Tell us the quantity and destination — we quote the direct AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CM replacement with price, stock and lead time, usually within 7-8 hours.