This model is discontinued
AirTAC has phased out the MTAL series. You can still order this code here: we ship the direct replacement MTBL32X75SCM, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCM
The AirTAC MTAL Rear Single Acting Mini Cylinder MTAL32X75SCM is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø32mm bore and 75mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the direct replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCM.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeSingle acting, pull (spring extend)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCM
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCM
The AirTAC MTAL32X75SCM is a discontinued single-acting pull-type mini cylinder. Air retracts the rod for the work stroke, while an internal spring extends it. Fail-safe home is extended. It delivers 261.2 N usable pull at 0.5 MPa. The direct replacement is the MTBL32X75SCM.
This 32 mm bore, 75 mm stroke unit uses a G1/8 port and a CM round-end back cover. The -S magnet pairs with CS1-M/DS1-M switches, whereas the MTBL upgrade uses CMSG/DMSG/EMSG sensors and a riveted body instead of threaded covers. Apply no external load on the spring extend stroke.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCM Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCM |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCM carries the same single-acting ratings.
Usable Pull Force (Ø32mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 261.2 N |
| 0.7 MPa | 399.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCM
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCM Is Used
Packaging Flap Pull
Retracts a carton sealing flap at 261.2 N pull at 0.5 MPa, relying on the spring-extended fail-safe to clear the path during an air loss stoppage.
Lathe Chuck Unclamp
Pulls a small lathe collet actuator back 75 mm; the spring-extend home safely opens the chuck when air is removed.
Press Brake Pin
Withdraws a locating pin on a press brake, using the single-acting pull to release the stock before the ram cycles.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCM with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCM
Replace the MTAL32X75SCM directly with the MTBL32X75SCM. Confirm the 32 mm bore, 75 mm stroke, G1/8 port, M10x1.25 rod thread, PT port form, and CM cover. The -S magnet switches from CS1-M/DS1-M to CMSG/DMSG/EMSG. Note the 0.2 MPa minimum pressure and the extended fail-safe home.
To step down, the 25 mm bore offers 137.2 N pull at 0.5 MPa. To step up, the 40 mm bore provides 439.4 N at 0.5 MPa. Apply no external load on the spring extend stroke; use an external device for mid-stroke holding. The fixed rubber bumper absorbs end-of-stroke impact.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCM (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCM instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCM FAQ
Yes, the MTAL32X75SCM is discontinued. The direct replacement is the MTBL32X75SCM, keeping the 32 mm bore, 75 mm stroke, G1/8 port, and CM cover. The MTBL uses a riveted body and CMSG/DMSG/EMSG sensors instead of threaded covers and CS1-M/DS1-M switches.
It is a single-acting pull cylinder, so air retracts the rod and the spring extends it. The fail-safe home is extended. Usable pull is 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa, requiring a 0.2 MPa minimum pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCM replaces this model 1:1.
Fast Dispatch
MTBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SCM → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCM)
Tell us the quantity and destination — we quote the direct AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SCM replacement with price, stock and lead time, usually within 7-8 hours.