This model is discontinued
AirTAC has phased out the MTAL series. You can still order this code here: we ship the direct replacement MTBL32X75U, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75U
The AirTAC MTAL Rear Single Acting Mini Cylinder MTAL32X75U is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø32mm bore and 75mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the direct replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75U.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeSingle acting, pull (spring extend)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75U
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75U
The AirTAC MTAL32X75U is a discontinued single-acting pull-type mini cylinder with a 32mm bore and 75mm stroke. Air retracts the rod while an internal spring extends it, yielding a fail-safe extended home position. It delivers a usable pull force of 261.2 N at 0.5 MPa. The direct replacement is the MTBL32X75U, matching the bore, stroke, and G1/8 port.
This U-cover variant features a flat-end rigid rear and a fixed rubber bumper. The MTAL uses threaded covers and a PT port thread, while the MTBL upgrade features a riveted rolling-packed body. This non-magnet SKU cannot take a position sensor; the old -S magnet used CS1-M/DS1-M switches, whereas the MTBL uses CMSG/DMSG/EMSG sensors. Apply no external load on the spring extend stroke.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75U Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75U |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75U |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75U carries the same single-acting ratings.
Usable Pull Force (Ø32mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 261.2 N |
| 0.7 MPa | 399.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75U
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75U Is Used
Injection Mold Ejection
Pulls a ejector pin back 75mm inside an injection mold against 261.2N at 0.5MPa, safely spring-extending to park the rod out during an air loss.
Packaging Flap Tensioning
Draws back a carton sealing flap on a packaging line using its 399.4N at 0.7MPa pull force, ensuring consistent mechanical tension.
Textile Loom Guide Retract
Retracts a thread guide on a textile loom using its 75mm stroke, relying on the spring-extend fail-safe to clear the mechanism when air drops.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75U with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75U
Replace this MTAL32X75U with the direct replacement MTBL32X75U. Confirm the 32mm bore, 75mm stroke, G1/8 port, M10x1.25 rod thread, and U flat-end back cover. The MTBL matches these specs but uses a riveted body instead of threaded covers. Remember the 0.2 MPa minimum operating pressure and the fail-safe EXTENDED home position.
If sizing down, the 25mm bore neighbor provides 137.2 N at 0.5 MPa. If sizing up, the 40mm bore provides 439.4 N at 0.5 MPa and uses a larger G1/4 port. Never apply external load on the spring extend stroke, as the fixed rubber bumper is not a lock.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75U (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75U instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75U FAQ
Yes, the MTAL32X75U is discontinued. The direct replacement is the MTBL32X75U, which matches the 32mm bore, 75mm stroke, 261.2N pull force at 0.5MPa, and G1/8 port. The MTBL upgrades the body to a riveted rolling-packed design.
This single-acting pull cylinder provides a usable pull force of 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa (equivalent to 40.7 kgf). It operates on 0.2-1.0 MPa pressure with a 50-800 mm/s speed range. The fail-safe home is EXTENDED, and it uses a fixed rubber bumper.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75U replaces this model 1:1.
Fast Dispatch
MTBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75U → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75U)
Tell us the quantity and destination — we quote the direct AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75U replacement with price, stock and lead time, usually within 7-8 hours.