
The AirTAC MTF Mini Cylinder MTF32X100SCM is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
Delivering a net pull force of 266.8 N at 0.5 MPa, this JIS-standard round-body mini cylinder utilizes a SUS304 stainless barrel and riveted aluminium covers. The MTF32X100SCM is a single-acting, spring-return unit where the internal spring constantly holds the piston rod extended, while supplying air to the 1/4 inch port retracts it. This fail-safe extended behavior makes it highly suitable for spring-open, air-close operations.
The riveted construction is notably shorter than a comparable ISO 6432 cylinder of the same bore and stroke, saving valuable machine space while resisting mild washdown environments. It features fixed TPU bumper pads for end-of-stroke deceleration across its 50-800 mm/s speed range. For position feedback, the built-in magnet (-S) supports CMSG, DMSG, or EMSG switches, and the CM round-end rear cover provides flexible mounting options.
| Model | Airtac MTF Mini Cylinder MTF32X100SCM |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 266.8 N |
| 0.7 MPa | 405.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Uses the 266.8 N pull force at 0.5 MPa to maintain constant tension on belts or filaments, releasing the load only when compressed air retracts the rod.
Keeps process valves securely open via spring force during a pneumatic power loss, using air pressure to pull the 12 mm rod closed when active.
Pulls packaging clamps back to their extended rest position after a cycle, relying on the spring return to safely clear the workspace for product ejection.
When sizing this 32 mm bore, compare its 266.8 N pull at 0.5 MPa against the smaller MTF25, which provides 153.6 N, and the larger MTF40, which delivers 434.8 N. Choose this model when your mechanism requires tensioning, closing, or a fail-safe return to the extended position upon air loss. Remember that a minimum operating pressure of 0.2 MPa is required to overcome the internal spring force.
The CM round-end back cover pairs with standard LB foot, FA flange, SDB pivot, and TC trunnion mounts to fit various frame geometries. Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors for stroke confirmation; a non-S variant cannot accept any switches.
Quick checklist
This single-acting pull cylinder generates 266.8 N of pull force at 0.5 MPa and 405 N at 0.7 MPa. These figures are net of the spring force. It requires a minimum operating pressure of 0.2 MPa to retract the rod, with a maximum pressure limit of 1.0 MPa.
The internal spring constantly drives the rod to the fully extended position, meaning the cylinder fails to the extended state on air loss rather than holding a mid-stroke load. The SUS304 stainless barrel provides mild corrosion resistance, and the -S designation allows CMSG, DMSG, or EMSG sensors to track rod position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.