
The AirTAC MTF Mini Cylinder MTF32X15CA is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 15mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
Delivering a net pull force of 266.8 N at 0.5 MPa, this JIS-standard round-body mini cylinder utilizes a single-acting pull mechanism where an internal spring normally holds the rod extended and compressed air retracts it. The SUS304 stainless barrel and riveted aluminium covers yield a shorter overall body than an equivalent ISO 6432 unit, saving valuable mounting space while resisting mild corrosion. It features a 12 mm rod, an M10x1.25 male thread, and a 1/4 inch port.
Because the spring constantly drives the rod outward, the cylinder fails safely to the extended position upon air loss, making it ideal for spring-open and air-close tasks. Operating pressure must be at least 0.2 MPa to overcome the spring. This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG sensors.
| Model | Airtac MTF Mini Cylinder MTF32X15CA |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 266.8 N |
| 0.7 MPa | 405.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Applies steady spring tension to hold a guard open, using the 266.8 N pull force to snap it closed when air is applied.
Keeps a valve or flap fully extended by spring pressure, automatically reverting to the open position if the compressed air supply drops out.
Pulls a lightweight 13 kg fixture out of the work zone against the spring load, releasing it back into place when air is removed.
When sizing this 32 mm bore, step down to the MTF25 for 153.6 N of pull force at 0.5 MPa, or step up to the MTF40 for 434.8 N if the load requires more retraction strength. The single-acting pull design fits perfectly when you need a mechanism to fail safely to the extended position on air loss, such as tensioning or holding a gate open. Ensure your air supply provides at least the 0.2 MPa floor to retract the rod against the spring.
This model includes a CA rear pivot cover for clevis mounting. Since this SKU is not the -S variant, it has no internal magnet and cannot support position sensing; choose an -S model if you require CMSG or DMSG switches. End damping is handled by fixed TPU bumper pads rather than an adjustable cushion.
Quick checklist
This 32 mm bore cylinder provides a net pull force of 266.8 N at 0.5 MPa and 405 N at 0.7 MPa. It requires a minimum operating pressure of 0.2 MPa to overcome the internal return spring and retract the rod.
No, this specific SKU lacks the internal magnet so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for position sensing. The rod is held extended by the spring at rest and cannot hold a mid-stroke load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.