
The AirTAC MTF Mini Cylinder MTF32X15SCA is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 15mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
Delivering 266.8 N of pull force at 0.5 MPa, this AirTAC MTF32X15SCA mini cylinder is engineered for single-acting tension and air-close tasks. The internal spring holds the piston rod normally extended, while supplying air to the 1/4 inch port retracts it. Because the spring drives the rod out, the cylinder fails safely to the extended position upon air loss, making it ideal for opening gates or releasing clamps during an emergency. The quoted force is already net of the spring resistance.
Built with a JIS-standard round body, the SUS304 stainless steel barrel and riveted aluminium covers yield a shorter mounting envelope than an equivalent ISO 6432 unit while resisting mild washdown corrosion. This specific configuration includes a CA rear pivot cover and an internal piston magnet (-S) for position sensing.
| Model | Airtac MTF Mini Cylinder MTF32X15SCA |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 266.8 N |
| 0.7 MPa | 405.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Uses the 266.8 N pull to pneumatically close a vent damper, relying on the internal spring to force the mechanism open and exhaust safely if compressed air is lost.
Applies continuous spring tension to hold a belt or cable taught, using the 15 mm stroke to release the tension quickly when 1/4 inch port air pressure is applied.
Keeps a sorting arm extended by default to divert items on a line, retracting the 12 mm rod only when actuated to let specific packages pass unobstructed.
When selecting this 32 mm bore, size both ways against your actual load requirements. If 266.8 N of pull at 0.5 MPa is excessive, step down to the MTF25 which provides 153.6 N; if the task demands more force, the MTF40 offers 434.8 N. Ensure your air supply meets the 0.2 MPa minimum floor required to overcome the internal spring before retraction can begin. The fixed TPU bumper pads absorb end-of-stroke impacts across the 50-800 mm/s speed range.
This model is tailored for spring-open, air-close mechanisms where tensioning or fail-safe extension is critical. The included -S magnet supports CMSG, DMSG, or EMSG electronic and reed switches for precise position feedback. For mounting, pair the standard front nose with the CA rear pivot cover, or utilise standard LB foot, FA flange, or TC trunnion brackets. Note that the spring holds the rod extended at rest but cannot lock a load at an arbitrary mid-stroke position.
Quick checklist
This 32 mm bore cylinder generates 266.8 N of pull force at 0.5 MPa and 405 N at 0.7 MPa. It requires a minimum operating pressure of 0.2 MPa to overcome the internal return spring, with a maximum pressure limit of 1.0 MPa and a proof pressure of 1.5 MPa.
The spring constantly extends the rod, so air pressure is only used to pull it in; on air loss the rod stays extended. This unit includes a piston magnet (-S) for CMSG, DMSG, or EMSG switches, and features a CA rear pivot cover alongside fixed TPU bumper pads for end-of-stroke deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.