
The AirTAC MTF Mini Cylinder MTF32X15SU is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 15mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
Delivering 266.8 N of pull force at 0.5 MPa, this JIS-standard round-body mini cylinder uses a SUS304 stainless barrel and riveted aluminium covers to save mounting length compared to an ISO 6432 unit. As a single-acting pull type, an internal spring holds the rod extended at rest, while supplying air to the 1/4 inch port retracts it.
The 32 mm bore houses a 12 mm rod with an M10x1.25 male thread, and the U flat-end rear cover simplifies direct back mounting. Because the -S variant includes a piston magnet, you can track position with CMSG, DMSG or EMSG switches. Fixed TPU bumper pads absorb end-of-stroke impacts across the 15 mm travel, operating reliably from 0.2 to 1.0 MPa.
| Model | Airtac MTF Mini Cylinder MTF32X15SU |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 266.8 N |
| 0.7 MPa | 405.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Uses the 266.8 N pull to draw back a holding clamp against spring pressure, releasing the part when air is removed.
Holds a valve open via spring force and pulls it closed on air signal, ensuring the system defaults to open during pressure loss.
Pulls a lightweight 13.6 kg tensioning jig out of the workspace, relying on the spring to push it back into the active position.
When sizing this 32 mm bore, verify your tension requirements against its 266.8 N pull at 0.5 MPa. If your load is lighter, stepping down to the MTF25 provides 153.6 N of pull, whereas heavier pulls up to 434.8 N require the MTF40. This single-acting pull design is optimal for spring-open, air-close tasks where losing air pressure safely drives the rod back out to the extended position.
Ensure your air supply meets the 0.2 MPa minimum floor required to overcome the internal spring. For mounting, match your frame to the U flat-end back cover or choose LB foot, FA flange, SDB pivot, or TC trunnion brackets. The integrated magnet (-S) allows direct CMSG, DMSG, or EMSG sensor installation without modifying the cylinder.
Quick checklist
It provides a net pull force of 266.8 N at 0.5 MPa and 405 N at 0.7 MPa. The operating pressure ranges from 0.2 to 1.0 MPa, with a 0.2 MPa minimum floor required to overcome the return spring and retract the rod.
The spring constantly extends the 12 mm rod, so air must be supplied to the 1/4 inch port to pull it in; on air loss, it fails to the extended position. The -S option adds a piston magnet for CMSG, DMSG, or EMSG sensors, and the SUS304 stainless build resists mild washdown environments.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.