
The AirTAC MTF Mini Cylinder MTF32X20SU is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 20mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
Delivering 266.8 N of pull force at 0.5 MPa, this AirTAC MTF32X20SU is a JIS-standard round-body mini cylinder built for single-acting pull operation. An internal spring holds the piston rod in the extended position, while supplying air to the 1/4 inch port retracts it. Because the spring actively pushes the rod out, the cylinder fails safely to the extended state upon air loss, making it ideal for spring-open and air-close mechanisms. The quoted pull force is already net of the spring resistance.
The SUS304 stainless steel barrel and riveted aluminium covers resist mild corrosion and washdown environments. For the same 32 mm bore and 20 mm stroke, this JIS body is noticeably shorter than an ISO 6432 cylinder, saving valuable mounting length. It uses fixed TPU bumper pads for end-of-stroke deceleration and features a U flat-end rear cover.
| Model | Airtac MTF Mini Cylinder MTF32X20SU |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 266.8 N |
| 0.7 MPa | 405.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Uses the 266.8 N pull force to maintain constant tension on belts or filaments, releasing the load safely to the extended position if air pressure drops.
Air pulls the actuator in to close the valve, while the internal spring automatically drives it back out to the open state during an air loss emergency.
Retracts a load weighing up to roughly 13.6 kg against gravity, relying on the spring to safely lower and extend the rod when the air supply ceases.
When sizing this 32 mm bore, compare its 266.8 N pull at 0.5 MPa against adjacent options. If your application requires less force, the smaller MTF25 provides 153.6 N; if you need more power, the larger MTF40 offers 434.8 N. Choose this single-acting pull model for tensioning, clamping, or fail-safe-open tasks where the load must return to the extended position when air is removed. Remember that a minimum operating pressure of 0.2 MPa is required to overcome the internal spring.
This specific SKU includes a built-in piston magnet, enabling position detection with CMSG, DMSG, or EMSG switches. You can mount it using LB foot brackets, FA flanges, SDB pivot blocks, or TC trunnions to suit your frame. Note that the spring drives the rod to the fully extended position on air loss; it will not hold a load at an arbitrary mid-stroke point.
Quick checklist
This 32 mm bore cylinder provides a net pull force of 266.8 N at 0.5 MPa and 405 N at 0.7 MPa. It requires a minimum operating pressure of 0.2 MPa to overcome the return spring, with a maximum pressure of 1.0 MPa and a proof pressure of 1.5 MPa.
The internal spring constantly extends the rod; air pressure only pulls it in. On air loss, the rod fails to the extended position, so it cannot hold a mid-stroke load. The S in the model code denotes a built-in magnet, allowing CMSG, DMSG, or EMSG switches to detect piston position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.