20|
verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MTF Series · JIS Mini Cylinder

Airtac MTF Mini Cylinder MTF32X20SUTC

The AirTAC MTF Mini Cylinder MTF32X20SUTC is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 20mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.

  • BoreØ32 mm
  • Stroke20 mm
  • Port size1/4"
  • Acting typeSingle acting, pull (spring return)
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$51.28 $58.43Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every MTF32 stroke, mounting and version on one page All MTF32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac MTF Mini Cylinder MTF32X20SUTC

Delivering 266.8 N of net pull at 0.5 MPa, this 32 mm bore cylinder uses air to retract the rod and an internal spring to push it back out. It is a JIS-standard round-body mini built with a SUS304 stainless barrel and riveted aluminium covers, giving you a shorter mounting envelope than an ISO 6432 unit of the same size. The -S suffix adds a piston magnet for CMSG, DMSG or EMSG sensors, while the U flat-end back cover and TC trunnion mounting simplify pivot installations.

Because the spring holds the rod extended at rest, the cylinder fails safely to the open position if air pressure drops. The 1/4" port feeds the air side, and fixed TPU bumper pads absorb end-of-stroke impacts.

Airtac MTF Mini Cylinder MTF32X20SUTC Technical Specifications

ModelAirtac MTF Mini Cylinder MTF32X20SUTC
SeriesMTF JIS mini cylinder
Bore sizeØ32 mm
Stroke20 mm
Acting typeSingle acting, pull (spring return)
Port size1/4"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.2 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range50 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 150 mm

Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.

Theoretical Output Force (Ø32mm)

PressurePull force (spring return)
0.5 MPa266.8 N
0.7 MPa405.0 N

Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.

Model Code: Airtac MTF Mini Cylinder MTF32X20SUTC

MTFJIS-standard round-body mini cylinder (single-acting pull, spring-return).
32Bore size in mm.
×20Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MTF Mini Cylinder MTF32X20SUTC Is Used

swap_horiz

Tensioning Gates

Pulls a gate shut with 266.8 N at 0.5 MPa, releasing it to spring open automatically during an air loss.

vertical_align_top

Fail-Safe Covers

Holds a lid retracted under air; the internal spring forces it back open if the 0.2 MPa pressure floor is lost.

conveyor_belt

Pivot Rejectors

Uses the TC trunnion to swing a 32 mm bore diverter arm out of the way, with the spring extending it to rest.

Is the Airtac MTF Mini Cylinder MTF32X20SUTC the Right Cylinder?

If 153.6 N from the MTF25 is too light, this 32 mm bore steps up to 266.8 N at 0.5 MPa; if you need more, the MTF40 provides 434.8 N. Use this single-acting pull type for spring-open, air-close jobs where losing air must drive the rod out. It needs at least 0.2 MPa to overcome the return spring. The included TC trunnion pairs with the U back cover for pivoting loads, and the -S magnet enables position sensing.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.2 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MTF Mini Cylinder MTF32X20SUTC FAQ

It provides 266.8 N of net pull at 0.5 MPa and 405 N at 0.7 MPa. Operating pressure is 0.2-1.0 MPa, with a 0.2 MPa minimum required to overcome the return spring.

Air retracts the rod, while the internal spring extends it, meaning it fails to the extended position on air loss. The -S suffix equips it with a magnet for CMSG, DMSG or EMSG sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC MTF Cylinders

Request a Quote for Airtac MTF Mini Cylinder MTF32X20SUTC

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for MTF32X20SUTC and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.