20|
verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MTF Series · JIS Mini Cylinder

Airtac MTF Mini Cylinder MTF32X25CA

The AirTAC MTF Mini Cylinder MTF32X25CA is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 25mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.

  • BoreØ32 mm
  • Stroke25 mm
  • Port size1/4"
  • Acting typeSingle acting, pull (spring return)
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$39.52 $45.87Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every MTF32 stroke, mounting and version on one page All MTF32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac MTF Mini Cylinder MTF32X25CA

Delivering 266.8 N of pull force at 0.5 MPa, this 32 mm bore cylinder uses internal spring pressure to keep the rod extended and compressed air to pull it back. The AirTAC MTF32X25CA is a JIS-standard round-body mini cylinder built with a SUS304 stainless steel barrel and riveted aluminium covers, making it shorter than an ISO 6432 unit of the same bore and stroke. Its 1/4" port and M10x1.25 male rod thread handle robust pneumatic retraction.

Because the spring constantly drives the rod outward, the cylinder fails to the extended position upon air loss, making it ideal for spring-open and air-close tasks. The quoted pull force is already net of the spring, requiring a minimum 0.2 MPa operating pressure to overcome it. This specific SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors without switching to the -S variant.

Airtac MTF Mini Cylinder MTF32X25CA Technical Specifications

ModelAirtac MTF Mini Cylinder MTF32X25CA
SeriesMTF JIS mini cylinder
Bore sizeØ32 mm
Stroke25 mm
Acting typeSingle acting, pull (spring return)
Port size1/4"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.2 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range50 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 150 mm

Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.

Theoretical Output Force (Ø32mm)

PressurePull force (spring return)
0.5 MPa266.8 N
0.7 MPa405.0 N

Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.

Model Code: Airtac MTF Mini Cylinder MTF32X25CA

MTFJIS-standard round-body mini cylinder (single-acting pull, spring-return).
32Bore size in mm.
×25Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MTF Mini Cylinder MTF32X25CA Is Used

swap_horiz

Tension Control

Pulls tensioning guides with 266.8 N @0.5 MPa force, using air to retract against a steady spring extension.

valve

Fail-Safe Open Valves

Holds a 32 mm bore valve open via spring pressure; air retraction closes it, defaulting to open on air loss.

Is the Airtac MTF Mini Cylinder MTF32X25CA the Right Cylinder?

When sizing this 32 mm bore, compare its 266.8 N @0.5 MPa pull force against the smaller MTF25 at 153.6 N or the larger MTF40 at 434.8 N. Choose this model when your mechanism requires a spring-open, air-close action or a fail-safe-to-extended setup, ensuring your air supply maintains at least the 0.2 MPa floor to retract the rod. It features a CA back cover for pivot mounting, and you can add LB foot, FA flange, or TC trunnion accessories as needed.

Remember that this base configuration has no internal magnet, meaning position sensing is not possible on this specific unit. If your application requires end-of-stroke detection, select the MTF32X25CA-S version to enable CMSG, DMSG, or EMSG switches.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.2 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MTF Mini Cylinder MTF32X25CA FAQ

It provides a single-acting pull force of 266.8 N at 0.5 MPa and 405 N at 0.7 MPa. The force is net of the spring, and it requires a minimum of 0.2 MPa to overcome the spring and retract the 12 mm rod.

No, this specific SKU lacks the internal magnet required for sensing. You must use the -S variant to mount CMSG, DMSG, or EMSG switches. The spring extends the rod at rest, so it fails to the extended position rather than holding a mid-stroke load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC MTF Cylinders

Request a Quote for Airtac MTF Mini Cylinder MTF32X25CA

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for MTF32X25CA and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.