
The AirTAC MTF Mini Cylinder MTF32X25SCA is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 25mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
Delivering 266.8 N of net pull at 0.5 MPa, this 32 mm bore JIS-standard round-body mini cylinder uses a single-acting pull mechanism where an internal spring extends the rod and compressed air retracts it. The SUS304 stainless steel barrel and riveted aluminium covers yield a shorter overall body than an equivalent ISO 6432 unit, saving valuable mounting length while resisting mild washdown corrosion. A 1/4" port and M10x1.25 male rod thread handle the pneumatic flow.
Because the spring constantly drives the piston outward, the cylinder fails safely to the extended position upon air loss, making it ideal for spring-open or air-close tasks. It requires a minimum 0.2 MPa operating pressure to overcome the return spring. For position feedback, the built-in -S magnet pairs directly with CMSG, DMSG, or EMSG switches, while fixed TPU bumper pads absorb end-of-stroke impacts across the 50-800 mm/s speed range.
| Model | Airtac MTF Mini Cylinder MTF32X25SCA |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 266.8 N |
| 0.7 MPa | 405.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Keeps a heavy access hatch extended open by spring force, using the 266.8 N air pull to close it securely during processing cycles.
Maintains steady outward tension on a cable spool, retracting only when 0.2 MPa or higher air pressure is applied to the 1/4" port.
Holds a packaging deflector in the extended outward position, pulling it up and out of the way via the M10x1.25 rod to allow product pass-through.
When sizing this 32 mm bore, compare its 266.8 N pull at 0.5 MPa against adjacent bores: step down to an MTF25 for 153.6 N, or step up to an MTF40 for 434.8 N.
Select this pull-type configuration for tensioning, lid lifting, or fail-safe-open duties where releasing air lets the spring push the rod out. The CA rear pivot cover suits articulated mounting; combine it with LB foot, FA flange, SDB pivot, or TC trunnion brackets as needed. Remember that a non-S SKU cannot accept sensors, but this -S variant supports full switch integration.
Quick checklist
This single-acting cylinder provides a net pull force of 266.8 N at 0.5 MPa and 405 N at 0.7 MPa. It requires a minimum operating pressure of 0.2 MPa to overcome the internal return spring and retract the rod.
The internal spring constantly extends the rod, meaning the cylinder fails safely to the fully extended position on air loss; it will not hold a mid-stroke load. The SUS304 stainless build resists mild corrosion, and the -S magnet allows CMSG or DMSG switches to track position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.