
The AirTAC MTF Mini Cylinder MTF32X25SCM is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 25mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
Delivering 266.8 N of net pull force at 0.5 MPa, the AirTAC MTF32X25SCM is a JIS-standard round-body mini cylinder built for single-acting pull operation. An internal spring holds the rod extended at rest, while supplying air to the 1/4 inch port retracts it. This fail-safe design naturally drives the rod back out upon air loss, making it highly effective for spring-open and air-close tasks.
The SUS304 stainless steel barrel and riveted aluminium covers yield a shorter mounting envelope than an ISO 6432 unit of identical bore and stroke, while resisting mild washdown corrosion. This 32 mm bore variant uses a 12 mm rod with an M10x1.25 male thread, and includes the -S magnet for CMSG, DMSG or EMSG sensors.
| Model | Airtac MTF Mini Cylinder MTF32X25SCM |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 266.8 N |
| 0.7 MPa | 405.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Pulls web materials or cables tight with 266.8 N of force at 0.5 MPa, releasing the tension instantly when air is removed and the spring extends.
Holds a guard lid open via the spring, using the 1/4 inch air port to pull the 12 mm rod inward and lower the lid safely during cycles.
Maintains a valve or gate in the extended open position, automatically snapping back to open if the pneumatic pressure drops below 0.2 MPa.
When sizing this 32 mm bore, compare its 266.8 N @0.5 MPa pull capacity against adjacent options. If your tensioning load is lighter, the MTF25 provides 153.6 N; for heavier pulling, the MTF40 yields 434.8 N. Ensure your air supply meets the 0.2 MPa minimum floor required to overcome the internal spring before retraction begins.
This specific SKU includes the CM round-end rear cover and the -S piston magnet for position sensing. You can pair it with LB foot, FA flange, SDB pivot, or TC trunnion mounts to fit your frame, relying on fixed TPU bumper pads to absorb end-of-stroke impacts across its 50-800 mm/s speed range.
Quick checklist
It provides a net pull force of 266.8 N at 0.5 MPa and 405 N at 0.7 MPa. The cylinder requires a minimum operating pressure of 0.2 MPa to overcome the return spring and begin retracting the rod.
The internal spring constantly pushes the rod to the extended position. If air pressure is lost, the spring immediately drives the rod back out, meaning it cannot hold a mid-stroke load. The -S magnet enables CMSG, DMSG and EMSG sensors for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.