
The AirTAC MTF Mini Cylinder MTF32X30U is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 30mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
Delivering 266.8 N of pull at 0.5 MPa, this 32 mm bore mini cylinder uses air to retract the rod and an internal spring to push it back out. Because the spring holds the piston normally extended, the MTF32X30U fails safely to the open position on air loss, making it ideal for spring-open / air-close jobs. The quoted pull force is already net of the spring resistance, and a minimum of 0.2 MPa operating pressure is required to overcome it.
Built as a JIS-standard round-body unit with a SUS304 stainless barrel and riveted aluminium covers, it is shorter than an ISO 6432 cylinder for the same bore and stroke, saving valuable mounting length. This specific SKU features a U flat-end back cover, a 1/4" port, and fixed TPU bumper pads for end-of-stroke deceleration. It has no magnet, so it cannot take a sensor; add the -S variant for CMSG / DMSG / EMSG switches.
| Model | Airtac MTF Mini Cylinder MTF32X30U |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 266.8 N |
| 0.7 MPa | 405.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Uses its 266.8 N pull force at 0.5 MPa to maintain steady tension on belts or filaments, safely releasing the load when air pressure drops.
Holds a vent or flap open via spring force; applying air retracts the rod to close it, ensuring the system defaults to open during an outage.
Pulls a 13.6 kg workpiece clamp back against spring pressure to release parts, ideal for short 30 mm stroke packaging tasks.
When sizing this 32 mm bore, compare it both ways: step down to the MTF25 for 153.6 N @0.5 MPa, or step up to the MTF40 for 434.8 N @0.5 MPa. Choose this single-acting pull model when your mechanism requires tensioning, closing, or a return-to-extended fail-safe state. Remember the 0.2 MPa pressure floor needed to beat the spring. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion. Since this base configuration lacks a magnet, select an -S version if you require position sensing.
Quick checklist
This 32 mm bore cylinder provides a net pull force of 266.8 N at 0.5 MPa and 405 N at 0.7 MPa. It requires a minimum operating pressure of 0.2 MPa to overcome the internal return spring, with a maximum pressure of 1.0 MPa.
The spring constantly extends the rod, so the cylinder fails to the extended position on air loss. It cannot hold an arbitrary mid-stroke load; for that, use a double-acting MF cylinder with an external rod lock. This version also lacks a magnet for sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.