20|
verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MTF Series · JIS Mini Cylinder

Airtac MTF Mini Cylinder MTF32X60CM

The AirTAC MTF Mini Cylinder MTF32X60CM is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.

  • BoreØ32 mm
  • Stroke60 mm
  • Port size1/4"
  • Acting typeSingle acting, pull (spring return)
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$45.19 $51.92Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every MTF32 stroke, mounting and version on one page All MTF32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac MTF Mini Cylinder MTF32X60CM

Delivering a net pull of 266.8 N at 0.5 MPa, this JIS-standard round-body mini cylinder uses an internal spring to keep the rod extended, while applied air retracts it. The MTF32X60CM features a SUS304 stainless barrel and riveted aluminium covers, offering a shorter overall body than an ISO 6432 unit for the same 32 mm bore and 60 mm stroke. It operates on a 1/4" port with a 12 mm rod, and the fixed TPU bumper pads absorb end-of-stroke impact without needing adjustment.

Because the spring constantly drives the rod outward, the cylinder fails safely to the extended position if air pressure drops. It requires a minimum 0.2 MPa to overcome the spring force. Note that this specific SKU lacks the -S magnet, so it cannot host CMSG, DMSG, or EMSG sensors.

Airtac MTF Mini Cylinder MTF32X60CM Technical Specifications

ModelAirtac MTF Mini Cylinder MTF32X60CM
SeriesMTF JIS mini cylinder
Bore sizeØ32 mm
Stroke60 mm
Acting typeSingle acting, pull (spring return)
Port size1/4"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.2 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range50 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 150 mm

Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.

Theoretical Output Force (Ø32mm)

PressurePull force (spring return)
0.5 MPa266.8 N
0.7 MPa405.0 N

Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.

Model Code: Airtac MTF Mini Cylinder MTF32X60CM

MTFJIS-standard round-body mini cylinder (single-acting pull, spring-return).
32Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (double rod, adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MTF Mini Cylinder MTF32X60CM Is Used

swap_horiz

Tension Control

Maintains constant outward tension on belts or web materials using the spring force, applying 266.8 N of pull at 0.5 MPa only when air retracts the line.

valve

Fail-Safe Open Gate

Holds a guard gate open via spring pressure and uses air to pull it closed, ensuring the barrier automatically extends outward during an air loss event.

Is the Airtac MTF Mini Cylinder MTF32X60CM the Right Cylinder?

When sizing this 32 mm bore, compare it directly: the MTF25 provides 153.6 N of pull at 0.5 MPa, while the larger MTF40 offers 434.8 N at the same pressure. Choose this MTF32X60CM when your application requires spring-open, air-close behavior or a fail-safe-to-extended setup, ensuring your air supply stays at or above the 0.2 MPa floor. The round-end CM back cover suits basic rear mounting, and you can pair it with LB foot, FA flange, SDB pivot, or TC trunnion brackets. If your cycle requires position sensing, you must select the -S magnet variant, as this base configuration cannot accept a switch.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.2 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MTF Mini Cylinder MTF32X60CM FAQ

This single-acting pull cylinder provides a net pull of 266.8 N at 0.5 MPa and 405 N at 0.7 MPa. It requires a minimum operating pressure of 0.2 MPa to overcome the internal return spring, with a maximum pressure limit of 1.0 MPa.

No, this specific SKU does not include a magnet, so CMSG, DMSG, or EMSG switches cannot be used. You must order the -S variant for position sensing. The spring extends the rod at rest, and the unit fails to the extended position on air loss rather than holding a mid-stroke load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC MTF Cylinders

Request a Quote for Airtac MTF Mini Cylinder MTF32X60CM

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for MTF32X60CM and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.