
Genuine AirTAC free mount cylinder, order code MU12X10 from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
AirTAC wrote MU12X10 with no option letters, and every blank in the code means a deliberate choice: the piston carries no magnet, the 6 mm rod ends in a female thread, and without the R letter the body mounts transversely. The 10 mm stroke sits mid-range among the standard MU12 strokes that run from 5 to 50 mm.
The double acting cylinder runs on air filtered by a 40 um element at 0.15-0.7 MPa, develops push 56.5 N and pull 42.4 N at 0.5 MPa, and closes each stroke with a bumper cushion. The square body can be fixed from any of its four sides, the bore is hard-anodized, the piston uses a compact bidirectional seal, the design follows JIS standards and needs no lubrication.
| Order code | MU12X10 |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 10 mm |
| Magnet | No magnet |
| Rod end | Female thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Pick MU12X10 when you want the plain configuration: 10 mm stroke, female rod thread and transverse mounting, with no magnet. MU12X10B changes only the rod end to a male thread, MU12X10S adds the magnet for CMSH, DMSH or EMSH position switches, and MUR12X10 rotates the mounting to axial. If you intend to detect rod position, the S version is the one to order; the magnet cannot be added later to this code.
Transverse mounting bolts the square body flat against a machine plate, and the 10 mm stroke is enough to swing or seat a light guide on a packaging line.
Female rod thread accepts a threaded attachment directly, and push 56.5 N at 0.5 MPa suits light press or hold checks on a test stand.
Fixing from any of the four body sides lets MU12X10 units stand side by side on crowded automation panels, each plumbed with its own M5x0.8 port.
Stroke 10 mm on a 12 mm bore with a 6 mm rod, double acting; push 56.5 N and pull 42.4 N at 0.5 MPa; operating pressure 0.15-0.7 MPa with 1.2 MPa (175 psi) proof pressure; M5x0.8 ports; piston speed 30-500 mm/s; temperature -20 to +70 C; bumper cushion; female rod thread; no magnet; transverse mounting.
No. MU12X10 is ordered without the S option, so the piston carries no magnet and switch feedback is not available on this code. Although the body grooves accept CMSH, DMSH or EMSH sensors, those switches need the magnet; order MU12X10S instead if position detection is required.