
Genuine AirTAC free mount cylinder, order code MU12X10B from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The B option is the whole difference in MU12X10B: the 6 mm rod carries an external male thread, so nuts, rod clevises or couplers screw straight onto the rod without a separate female-thread adapter. Stroke stays at 10 mm on the 12 mm bore, double acting through M5x0.8 ports, and the body mounts transversely since there is no R letter in the code.
Like the rest of the MU series, the square body fixes from any of its four sides and several cylinders can be mounted side by side, the bore is hard-anodized against wear, and a compact bidirectional seal rides on the piston. It runs at 0.15-0.7 MPa on air filtered by a 40 um element, cushions with bumpers at each end of stroke, follows JIS standards and needs no lubrication. No magnet is fitted, so piston position cannot be sensed on this code.
| Order code | MU12X10B |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 10 mm |
| Magnet | No magnet |
| Rod end | Male thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Order MU12X10B when your rod-side hardware needs an external thread to bite on. MU12X10 is the identical cylinder with a female rod end, MU12X10S adds the piston magnet for CMSH, DMSH or EMSH switches, and MUR12X10B combines the male thread with axial mounting if your bolts must run along the rod axis. Within the same bore, standard strokes step from 5 mm up to the 50 mm maximum.
The male thread takes a lock nut directly, letting you set tooling or fixture height on the rod and lock it without adapters between cylinder and nut.
Threaded fixtures or probes screw onto the male rod end for quick swap-outs on small assembly stations working within the 10 mm stroke.
Transverse mounting on any of the four body sides plus a 12 mm bore pushing 56.5 N at 0.5 MPa fits compact clamp points where space is short.
Stroke 10 mm on a 12 mm bore with a 6 mm rod, double acting; push 56.5 N and pull 42.4 N at 0.5 MPa; operating pressure 0.15-0.7 MPa with 1.2 MPa (175 psi) proof pressure; M5x0.8 ports; piston speed 30-500 mm/s; temperature -20 to +70 C; bumper cushion; male rod thread (B option); no magnet; transverse mounting.
Only the rod end. The B option gives an external male thread on the 6 mm rod instead of the female thread of MU12X10, so nuts and rod accessories screw on directly. Stroke, bore, mounting style, force and ports are identical, and neither code includes the magnet, so confirm any position-sensing need from the datasheet or step to the S version.