
Genuine AirTAC free mount cylinder, order code MU12X20 from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The MU12X20 pairs a Dia 12 mm bore with a 20 mm stroke in AirTAC's square free-mount body. Because the body can be fixed from any of its four sides and several cylinders can sit side by side, it fits compact multi-cylinder fixtures. It is double acting: air drives the Dia 6 mm rod out and back. At 0.5 MPa it delivers 56.5 N push and 42.4 N pull through an M5x0.8 port.
This code carries no piston magnet and keeps the standard female rod thread. The hard-anodized bore resists wear, a locating boss on the front cover makes positioning accurate, and the piston uses a compact bidirectional seal. It runs on air filtered by a 40 um element at 0.15-0.7 MPa, needs no lubrication, and follows JIS standards.
| Order code | MU12X20 |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 20 mm |
| Magnet | No magnet |
| Rod end | Female thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Choose MU12X20 when 20 mm of travel matches your tooling; for shorter or longer moves step to the neighbouring MU12X15 or MU12X25 stroke codes. Pick MU12X20B if your linkage needs a male rod thread, or MU12X20S if you want position sensing, since the CMSH, DMSH and EMSH switches need the piston magnet. This code mounts transversely; axial fixing requires the R mounting variant. Note the stroke tolerance is +1.0/0 mm.
The 20 mm stroke advances a clamp or stop into a jig, with 56.5 N of push force at 0.5 MPa holding light parts securely.
Fix the square body from any of its four sides and mount several MU12X20 units next to each other for compact multi-point pressing.
The female rod thread accepts standard threaded tips, and the 30-500 mm/s speed range suits quick eject or probe moves on small assemblies.
Dia 12 mm bore, Dia 6 mm rod, 20 mm stroke (tolerance +1.0/0 mm), double acting. Push 56.5 N and pull 42.4 N at 0.5 MPa. Port M5x0.8, operating pressure 0.15-0.7 MPa, proof pressure 1.2 MPa (175 psi), temperature -20 to +70 C, piston speed 30-500 mm/s, bumper cushion, no lubrication needed.
Not with this code. MU12X20 has no piston magnet, so rod position cannot be detected. The body does carry sensor grooves that accept CMSH, DMSH or EMSH switches without brackets, so if detection matters order the MU12X20S variant with the magnet instead.