
Genuine AirTAC free mount cylinder, order code MU12X20B from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
Order MU12X20B when the rod has to screw straight into your tooling: the B option turns the standard female thread of the Dia 6 mm rod into a male thread. Inside, it is the Dia 12 mm double-acting free-mount cylinder, giving 56.5 N push and 42.4 N pull at 0.5 MPa over a 20 mm stroke, supplied and exhausted through M5x0.8 ports.
The square body mounts transversely and can be bolted from any of its four sides, with a locating boss on the front cover for repeatable positioning. A hard-anodized bore, a compact bidirectional piston seal and bumper cushioning keep travel smooth at 30-500 mm/s, and the cylinder needs no lubrication.
| Order code | MU12X20B |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 20 mm |
| Magnet | No magnet |
| Rod end | Male thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Within the 20 mm stroke group, MU12X20B is the male-thread choice; MU12X20 keeps the female thread and MU12X20S adds the piston magnet for sensing. If travel changes, the same B option exists on the neighbouring MU12X15 and MU12X25 stroke codes, up to the 50 mm maximum for this bore. This code is the transverse-mount version; the R option switches the same cylinder to axial mounting.
The male rod thread screws straight into chucks, adapters and pusher pads, removing coupling nuts from the Dia 6 mm rod.
A 20 mm stroke at 0.15-0.7 MPa nudges small parts onto or off a track, with the four-side fixing letting the body sit flat along the frame.
Use the 5-50 mm stroke family as fine-adjust stops; the male thread holds standard threaded stop screws securely at up to 56.5 N push.
Dia 12 mm bore, Dia 6 mm rod with male thread (B option), 20 mm stroke, double acting. Push 56.5 N and pull 42.4 N at 0.5 MPa. M5x0.8 ports, operating pressure 0.15-0.7 MPa, proof pressure 1.2 MPa (175 psi), temperature -20 to +70 C, piston speed 30-500 mm/s, bumper cushion.
In the AirTAC ordering code a blank rod-end field means a female thread, while B specifies a male thread on the Dia 6 mm rod. Everything else about MU12X20B stays the same as the female-thread version: same 20 mm stroke, same forces, same M5x0.8 ports, and no piston magnet.