
Genuine AirTAC free mount cylinder, order code MU12X25 from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The MU12X25 is the plain 25 mm stroke version of the AirTAC MU12 free mount cylinder: no S magnet is ordered, and the rod end keeps the standard female thread on the Ø6 mm rod. That female thread accepts a lock nut or stud, which suits fixture work where the load is bolted to the piston rod rather than screwed into it.
The 25 mm move runs on the same compact platform as the whole MU series: a Ø12 mm double acting bore pushing 56.5 N and pulling 42.4 N at 0.5 MPa, fed through M5x0.8 ports at 0.15-0.7 MPa. The square body mounts from any of its four faces, the bore is hard-anodized for wear resistance, and the front cover carries a locating boss for accurate positioning.
| Order code | MU12X25 |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 25 mm |
| Magnet | No magnet |
| Rod end | Female thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Pick MU12X25 if you want maximum travel in the standard range up to 25 mm without position sensing. Add MU12X25S if a sensor needs to track the piston, choose MU12X25B for a male rod thread instead of the female one, or step back to MU12X20 or forward to MU12X30 for a different stroke on the identical body.
A 25 mm stroke lets the female-threaded rod lift or lower a stop screw on small assembly fixtures, using the +1.0/0 mm stroke tolerance check at setup.
The rod nudges components square before fastening on a manual bench, with the female thread taking a threaded tip or nut-retained plate.
The four-side square body allows several MU12X25 units to be fixed side by side, driving a row of 25 mm points from one M5x0.8 manifold feed each.
Stroke 25 mm (tolerance +1.0/0 mm), bore 12 mm, rod 6 mm with a female thread, no magnet. Double acting, 56.5 N push and 42.4 N pull at 0.5 MPa, port M5x0.8, operating pressure 0.15-0.7 MPa, proof pressure 1.2 MPa (175 psi), speed 30-500 mm/s, bumper cushion.
The body has the grooves for CMSH, DMSH or EMSH sensors, but this order code has no S magnet in the piston, so those sensors cannot detect rod position. If feedback is required, order MU12X25S instead for the same 25 mm stroke with a magnet.