
Genuine AirTAC free mount cylinder, order code MU12X30B from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC MU12X30B is the 30 mm stroke build of the MU series free mount cylinder with a 12 mm bore and a male rod thread on the 6 mm rod. Its square body can be bolted from any of the four sides, so the cylinder can lie flat under a slide, stand beside a guide rail or be banked side by side where several small actuators share one plate. A locating boss on the front cover keeps positioning accurate, and the bore is hard-anodized for wear resistance.
This code carries no magnet: rod position cannot be tracked by a switch, so order MU12X30S or MU12X30SB instead if sensing is planned. Air at 0.15-0.7 MPa delivers 56.5 N push and 42.4 N pull at 0.5 MPa through a single M5x0.8 port. The unit follows JIS standards, needs no lubrication and uses a bumper cushion across a 30-500 mm/s speed range.
| Order code | MU12X30B |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 30 mm |
| Magnet | No magnet |
| Rod end | Male thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Pick MU12X30B when you need to screw directly into threaded rod-end accessories on a 30 mm stroke and do not plan position feedback. The sibling MU12X30 shares the stroke but ends in a female thread, MU12X30S swaps to a magnet while keeping the female thread, and MU12X30SB combines magnet and male thread in one code. For axial rather than transverse fixing of the body, the R-suffixed variants change how the cylinder bolts down.
The B-option male rod thread on the 6 mm rod threads straight into tapped clamping tips and custom tooling, closing over a 30 mm stroke with 56.5 N of push.
On small part-eject nests the transverse body mounting lets the square cylinder sit flush against machine plates, fed by one M5x0.8 port.
In lab and prototype fixtures the bumper cushion gives a gentle 30 mm stroke at 30-500 mm/s with no lubrication needed between -20 and +70 C.
Dia 12 mm bore with a 6 mm rod, 30 mm stroke (tolerance +1.0/0 mm), double acting, male rod thread, no magnet, M5x0.8 port, 0.15-0.7 MPa operating pressure with 1.2 MPa (175 psi) proof pressure, 56.5 N push and 42.4 N pull at 0.5 MPa, -20 to +70 C, piston speed 30-500 mm/s, bumper cushion.
The body has sensor grooves that accept CMSH, DMSH or EMSH sensors without brackets, but this code has no piston magnet, so a switch will not detect the rod. If position feedback matters, order MU12X30S (magnet, female thread) or MU12X30SB (magnet, male thread) from the same ordering table.