verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MU12 · Free Mount Cylinder

Airtac MU Mini Free Mount Cylinder MU12X35

Genuine AirTAC free mount cylinder, order code MU12X35 from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke35 mm
  • MagnetNo magnet
  • Rod endFemale thread
  • ActionDouble acting
  • Bore / rodØ12 / Ø6 mm
  • Standard strokes5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm)
$25.35 $32.85Save 22%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every MU12 stroke, magnet and rod end on one page All MU12 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac MU Mini Free Mount Cylinder MU12X35

Ordering code MU12X35 specifies the 12 mm bore MU free mount cylinder with a 35 mm stroke, female rod thread and no piston magnet. The square body can be fixed from any of its four sides, and several cylinders can be mounted side by side, so a 35 mm working stroke can be placed where radial space is tight. As a double acting unit it develops a theoretical 56.5 N push and 42.4 N pull at 0.5 MPa.

A locating boss on the front cover makes positioning accurate, the bore is hard-anodized for wear resistance, and the piston uses a compact bidirectional seal. Air filtered by a 40 um element runs through M5x0.8 ports with no lubrication needed. Sensor grooves for CMSH, DMSH or EMSH sensors are machined into the body, but since this build carries no magnet, position detection would require the MU12X35S variant.

Airtac MU Mini Free Mount Cylinder MU12X35 Technical Specifications

Order codeMU12X35
ProductFree Mount Cylinder
Stroke35 mm
MagnetNo magnet
Rod endFemale thread
ActionDouble acting
Bore / rodØ12 / Ø6 mm
Standard strokes5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm)
Force at 0.5 MPaPush 56.5 N · pull 42.4 N
PortM5×0.8
FluidAir (filtered by 40 µm element)
Operating pressure0.15-0.7 MPa
Proof pressure1.2 MPa (175 psi)
Temperature-20 to +70 °C
Piston speed30-500 mm/s
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.

How to choose

Pick MU12X35 when the 35 mm travel and a female threaded rod suit your fixture. Order MU12X35B if the rod must carry a male thread, MU12X35S if a piston magnet is needed for sensors, and MU12X30 or MU12X40 for 5 mm shorter or longer travel - 35 mm sits mid-range in the 5 to 50 mm standard stroke list, with a maximum stroke of 50 mm and tolerance +1.0/0 mm.

Applications

settings

Compact clamp fixture

Fixing the square body from any of its four sides lets this 35 mm stroke cylinder clamp parts inside a narrow jig, with the 12 mm bore delivering 56.5 N push at 0.5 MPa.

view_module

Side-by-side actuation

Several MU12 bodies can be mounted side by side to actuate multiple points in one dense bank, each served by its own M5x0.8 port within the 0.15-0.7 MPa supply range.

conveyor_belt

Light part ejection

The 35 mm stroke sweeps small workpieces off a conveyor edge, running at 30-500 mm/s so the eject cycle can match line speed without cushioning shocks thanks to the bumper.

FAQ

What are the key figures of the MU12X35?

Double acting free mount cylinder, 12 mm bore with 6 mm rod, 35 mm stroke (tolerance +1.0/0 mm), female rod thread, no magnet. Theoretical force at 0.5 MPa: 56.5 N push and 42.4 N pull. Port M5x0.8, operating pressure 0.15-0.7 MPa, proof pressure 1.2 MPa (175 psi), temperature -20 to +70 C, piston speed 30-500 mm/s, bumper cushion.

Can the MU12X35 report rod position?

The body has grooves that accept CMSH, DMSH or EMSH sensors without brackets, but this code carries no piston magnet, so the sensors cannot detect position. Order MU12X35S, which adds the magnet, if position feedback is required; the mechanical data stays identical.