
Genuine AirTAC free mount cylinder, order code MU12X35B from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The B suffix in MU12X35B changes the rod end: instead of a female thread you get a male thread, so adapters, levers or tooling screw straight onto the 6 mm rod of this 35 mm stroke, 12 mm bore free mount cylinder. Action stays double acting, giving a theoretical 56.5 N push and 42.4 N pull at 0.5 MPa, and no piston magnet is fitted.
The square body fixes transversely from any of its four sides; switching the mounting direction would mean ordering the R axial version. Inside, the bore is hard-anodized for wear resistance and the piston uses a compact bidirectional seal, while a locating boss on the front cover keeps positioning accurate. M5x0.8 ports, a 0.15-0.7 MPa working range and a bumper cushion complete the package, with no lubrication required for filtered air.
| Order code | MU12X35B |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 35 mm |
| Magnet | No magnet |
| Rod end | Male thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Choose MU12X35B when your attachment needs a male thread rather than the female thread of MU12X35; both share the same 35 mm stroke. If position sensing is planned, MU12X35S adds the piston magnet for the CMSH, DMSH or EMSH grooves, while MU12X35R would move this same bore and stroke to axial mounting.
The male rod thread lets you screw chucks, probes or pushers directly onto the 6 mm rod, turning this 35 mm stroke cylinder into a compact actuator inside a test or assembly station.
Mounted transversely on any of the four body sides, the cylinder retracts locating pins 35 mm between cycles, with the bumper cushion softening the return at up to 500 mm/s.
A light pressing or snapping task uses the 42.4 N pull and 56.5 N push of the 12 mm bore, fed through M5x0.8 ports from a 0.15-0.7 MPa circuit with no lubricator in the line.
Double acting free mount cylinder, 12 mm bore with 6 mm rod, 35 mm stroke (tolerance +1.0/0 mm), male rod thread (B option), no magnet, transverse mounting. Theoretical force at 0.5 MPa: 56.5 N push and 42.4 N pull. Ports M5x0.8, operating pressure 0.15-0.7 MPa, proof pressure 1.2 MPa (175 psi), temperature -20 to +70 C, piston speed 30-500 mm/s, bumper cushion.
B replaces the standard female thread with a male thread on the 6 mm rod, so external parts screw on instead of sliding over the rod. Confirm the mating thread from the datasheet; the mechanical and port data of the cylinder are otherwise identical to MU12X35.