verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MU12 · Free Mount Cylinder

Airtac MU Mini Free Mount Cylinder MU12X40

Genuine AirTAC free mount cylinder, order code MU12X40 from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke40 mm
  • MagnetNo magnet
  • Rod endFemale thread
  • ActionDouble acting
  • Bore / rodØ12 / Ø6 mm
  • Standard strokes5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm)
$26.02 $33.52Save 22%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every MU12 stroke, magnet and rod end on one page All MU12 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac MU Mini Free Mount Cylinder MU12X40

The plain MU12X40 order code keeps the series defaults on both option positions: no magnet in the piston and a female thread on the 6 mm rod, so a stud or screwed fitting threads directly into the rod end. At 40 mm the stroke sits well along the 5-50 mm standard range while the square body still fixes from any of its four sides.

It is double acting with push 56.5 N and pull 42.4 N at 0.5 MPa, an M5x0.8 port, 0.15-0.7 MPa operating pressure, 30-500 mm/s piston speed and a bumper cushion. The bore is hard-anodized for wear resistance, the locating boss on the front cover keeps positioning accurate, and lubrication is not required on this JIS-based design.

Airtac MU Mini Free Mount Cylinder MU12X40 Technical Specifications

Order codeMU12X40
ProductFree Mount Cylinder
Stroke40 mm
MagnetNo magnet
Rod endFemale thread
ActionDouble acting
Bore / rodØ12 / Ø6 mm
Standard strokes5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm)
Force at 0.5 MPaPush 56.5 N · pull 42.4 N
PortM5×0.8
FluidAir (filtered by 40 µm element)
Operating pressure0.15-0.7 MPa
Proof pressure1.2 MPa (175 psi)
Temperature-20 to +70 °C
Piston speed30-500 mm/s
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.

How to choose

If you need to detect rod position, step up to MU12X40S, which adds the piston magnet; MU12X40B swaps the female thread for a male one. Shorter steps in the same plain configuration are MU12X35 and MU12X30, longer ones MU12X45 and MU12X50. Transverse mounting is standard here; the axial variant carries the code MUR12X40.

Applications

build

Screwed rod extensions

The female thread on the 6 mm rod accepts a stud directly, keeping the 40 mm stroke linkage simple.

factory

Short indexing slides

A 40 mm index travel at 30-500 mm/s covers small feeder or gate movements on crowded machine frames.

handyman

Latch and gate actuation

Push 56.5 N at 0.5 MPa is enough for small latches where no position feedback is specified.

FAQ

What are the key figures of the MU12X40?

Bore 12 mm, rod 6 mm, stroke 40 mm (series maximum 50 mm), push 56.5 N and pull 42.4 N at 0.5 MPa, M5x0.8 port, 0.15-0.7 MPa operating pressure, 30-500 mm/s piston speed, -20 to +70 C, bumper cushion, female rod thread, no magnet.

Can I add position sensing to this cylinder later?

The plain MU12X40 has no piston magnet, so sensors cannot read rod position. Order MU12X40S instead if you need magnet operation with CMSH, DMSH or EMSH switches; the mounting grooves are already on the body.