
Genuine AirTAC free mount cylinder, order code MU12X40B from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
Adding the B option to the 40 mm stroke changes only the rod end: a male thread replaces the standard female one, so a locknut can clamp work or tooling against the rod shoulder on the 6 mm rod. Like every MU12 cylinder it is double acting, mounts from any of its four sides, and this code carries no piston magnet - order MU12X40S if rod position needs to be sensed.
The mechanical specification is unchanged by the option: push 56.5 N and pull 42.4 N at 0.5 MPa, M5x0.8 port, 0.15-0.7 MPa operating pressure, 30-500 mm/s piston speed, bumper cushion, air filtered by a 40 um element. The bore is hard-anodized, the design follows JIS standards and no lubrication is needed.
| Order code | MU12X40B |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 40 mm |
| Magnet | No magnet |
| Rod end | Male thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Choose MU12X40B when a locknut or external attachment must grip the rod; choose MU12X40 for the female-thread default or MU12X40SB to combine the male thread with the piston magnet. For a shorter step take MU12X35B, for a longer one MU12X45B, up to the 50 mm limit. The axial mounting variant of this code is written MUR12X40B.
The male rod thread lets a locknut hold a small press head or probe firmly against the rod shoulder.
Push 56.5 N at 0.5 MPa over a 40 mm stroke suits light stamping or snap-fit checks on small parts.
Side-by-side mounting saves space on compact packaging heads where position feedback is not required.
Bore 12 mm, rod 6 mm, stroke 40 mm (series maximum 50 mm), push 56.5 N and pull 42.4 N at 0.5 MPa, M5x0.8 port, 0.15-0.7 MPa operating pressure, 30-500 mm/s piston speed, -20 to +70 C, bumper cushion, male rod thread, no magnet.
Only the rod end: the B option gives a male thread instead of the blank female thread. Bore, stroke, forces, mounting style and the sensor grooves for CMSH, DMSH and EMSH sensors are all identical to the plain MU12X40.